71
Advanced Setup – Part 1 Advanced Setup – Part 1
Mute Level:
Set the volume attenuation level when the mute mode is set
for the different zones.
• FULL
The volume is fully muted.
• –40 dB
The volume is lowered 40 dB from the current level.
• –20 dB
The volume is lowered 20 dB from the current level.
Volume Level:
Set whether to fix the output level for the different zones or
make it variable.
• Variable
The level can be adjusted freely using buttons on the remote
control unit.
• –40 dB, 0 dB
The output level is fixed at the set level and the volume can
no longer be adjusted.
3
Press the ENTER button to enter the setting.
• The “Option Setup” menu reappears.
•The volume control for ZONE3 can be set only when “ZONE3”
is selected at “Power Amp Assign” ( page 70).
• For ZONE2 and ZONE3, the “Volume Limit” and “Power On
Level” can be set when “Variable” is selected for “Volume
Level”.
• When the power amplifier is assigned to either of the ZONE2
and ZONE3 channels at “Power Amp Assign”, “–VAR–” (only
variable) is displayed and the fixed level cannot be set.
Setting the Trigger Out
•Two 12 V DC Trigger Outputs on the rear panel can be used to
control other devices with compatible trigger inputs, such as
motorized screens, motorized screen masking, motorized
drapes, and other trigger-controlled devices.
• Set the DC output supplied from the trigger out terminals for
the various input sources to “ON” or “OFF”.
1
Press the CURSOR
DD
or
HH
button to select
“Trigger Out” at “Option Setup” menu, then
press the ENTER button.
• The “Trigger Out” screen appears.
3
Press the CURSOR
FF
or
GG
button to select the
zone (MAIN ZONE, ZONE2 and ZONE3).
The power supplied from the trigger out terminal turns on
and off when the power for the set zone is turned on and
off.
6
Press the ENTER button.
• The “Trigger Out” screen reappears.
Use the same procedure to make the settings for Trigger
Out 2.
2
Press the CURSOR
DD
or
HH
button to select the
trigger out terminal you want to set, then press
the ENTER button.
• The setting screen appears.
Example: When “Trigger Out 1” is selected
5
If “MAIN” was selected at step 3:
Press the CURSOR
DD
or
HH
button to select the
surround mode, then press the CURSOR
FF
or
GG
button to select “ON” or “OFF”.
4
Press the CURSOR
DD
or
HH
button to select the
input source, then press the CURSOR
FF
or
GG
button to select “ON” or “OFF”.
ON:
When that input source is selected, the power supplied from
the trigger out terminal turns on.
OFF:
When that input source is selected, the power supplied from
the trigger out terminal turns off.
ON:
If “ON” is selected when an input source set to “ON” is
selected, the power supplied from the trigger out terminal
turns on.
OFF:
If “OFF” is selected when an input source set to “ON” is
selected, the power supplied from the trigger out terminal
turns off.
ENGLISH
ENGLISH
