Bedienungsanleitung Denon AVR-391 (Seite 12 von 56) (Englisch)

584362

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

ENGLISH

Basic version Advanced version InformationSimple version

Set up speakers

Remote control operation

buttons

Move the cursor

(Up/Down/Left/Right)

Conﬁ rm the setting Return to previous menu

Use ui to select “Channel Level”,

and then press ENTER.

Channel Level

Test Tone Start

Press ENTER.

Output test tone.

Use ui to select a speaker, and use

o p to adjust the sound volume of

each speaker to be equal.

FL / C / FR / SR / SBRz / SBLz / SL / SW

Select the speaker.

z When the “Speaker Conﬁ g.” – “S.B(Pre)”

(vpage 7) setting is set to “None”,

“SBL” and “SBR” is not displayed.

• –12.0dB – +12.0dB (0.0dB) : Adjust the volume.

• When o is pressed while the subwoofer volume

is set to “–12 dB”, the “SW” setting switches

to “OFF”.

• When “Channel Level” is adjusted, the adjusted

values are set for all the surround modes. To

adjust the channel level separately for the

different surround modes, use the operation

see page 27.

NOTE

• Speakers set to “None” in the “Speaker

Conﬁ g.” (vpage7) settings are not displayed.

• When a headphones jack is inserted in the

PHONES jack of this unit, the “Channel Level”

is not displayed.

Default

The “Channel Level” settings are

returned to the default settings.

• Yes : Reset to the defaults.

• No : Do not reset to the defaults.

Press ENTER to enter the setting.

Test Tone Start

Press RETURN.

Channel Level

n Outputting a test tone directly with remote

control operation

This is operable when the surround mode is

Dolby Pro Logic g, Dolby Pro Logic gx, or DTS

NEO:6.

q Press TEST.

The test tone is output from the “L” channel

of the front speakers.

w Use o p to adjust the sound volume of each

speaker to be equal.

e Use u i to select the next speaker for

outputting the test tone.

r Once adjustment is completed, press TEST

again.

Use ui to select “Crossover Freq ”,

and then press ENTER.

Crossover Freq.

Front :• 80Hz–

Use ui to select a speaker, and use

o p to select the frequency.

Front / Center / Surround / S.Back

Specify crossover frequency for each

speaker.

• 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz

/ 120Hz / 150Hz / 200Hz / 250Hz : Set the

crossover frequency.

Channel Level

Default settings are underlined.

• “Crossover Freq.” can be set when the “Bass

Setting” – “Mode” (vpage 8) setting is

“LFE+Main”, or when you have a speaker that

is set to “Small”.

• Always set the crossover frequency to “80Hz”.

When using small speakers, however, we

recommend setting the crossover frequency to

a higher frequency.

• For speakers set to “Small”, sound below the

crossover frequency is cut from the sound

output. The cut bass sound is output from the

subwoofer or front speakers.

• The “Mode” setting (vpage 8) determines

which speakers can be set.

• When “LFE” is selected, speakers set to

“Small” at “Speaker Conﬁ g.” can be set. If

the speakers are set to “Large”, “– Full –” is

displayed and the setting cannot be made.

• If set to “LFE+Main”, this setting can be made

regardless of the speaker size.

Press ENTER to enter the setting.

Crossover Freq.

Press MENU.

The menu returns to normal display.

Crossover Freq

Default settings are underlined.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-391 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info