Bedienungsanleitung Denon AVR-4308CI (Seite 95 von 113) (Englisch)

584366

Zoom out

Zoom in

Vorherige Seite

1/113

Nächste Seite



Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting Speciﬁcations

Symptom Cause Countermeasure Page

Cannot connect

to network.

• The settings of the SSID

and network key (WEP) are

incorrect.

• The reception is poor and the

signals cannot be received.

• There are multiple networks and

the usable channels overlap.

• Match the network settings with

the AVR-4308CI’s settings.

• Shorten the distance from the

wireless LAN’s access point,

remove any obstacles and

otherwise improve visibility, then

try reconnecting. Also install

away from microwave ovens

and the access points of other

networks.

• Set the access point’s channel

settings away from the channels

used for other networks.

Alternatively, connect using a

network cable.

33 ~ 35

–

Played sound is

interrupted or

sound cannot be

played.

• There are multiple networks and

the usable channels overlap.

• Set the access point’s channel

settings away from the channels

used for other networks.

Alternatively, connect using a

network cable.

–

GWireless LANH GXM Satellite RadioH

Symptom Cause Countermeasure Page

“CHECK XM

TUNER” is

displayed.

• The XM Mini-Tuner is not

installed or not fully seated in the

XM Mini-Tuner Dock or the XM

Mini-Tuner dock is not connected

to the AVR-4308CI.

• Conﬁrm the XM Mini-Tuner is

fully seated in the dock and check

the XM Mini-Tuner dock cable is

connected to the AVR-4308CI.

”CHECK

ANTENNA” is

displayed.

• AVR-4308CI’s XM connector and

the XM Mini-Tuner and Home

Dock is not properly connected.

• Check that the connections are

correct.

”NO SIGNAL” is

displayed.

• The signal cannot be received. • Reposition your XM Mini-Tuner

and Home Dock antenna.

”OFF AIR” is

displayed.

• The selected channel is not

currently broadcasting.

• Select another channel. –

Receiving only

XM channels 0

and 1.

• The XM Mini-Tuner is not

activated.

• Contact XM Radio. –

“XM - - - ” is

displayed.

• The selected channel is not

available. The channel may have

been reassigned to a different

channel number. This message

may occur initially with a new

radio or a radio that has not

received XM’s signal for an

extended period.

• Consult the latest channel

guide at www.xmradio.com or

www.xmradio.ca for the current

list of channels. For cases of

a new radio or a radio that has

not received XM’s signal for an

extended period, allow the radio

to receive the XM satellite signal

for at least 5 minutes and then

try to select the channel again.

–

“UPDATING” is

displayed.

• You selected an XM channel that

is blocked or cannot be received

with your XM subscription

package.

• Consult the latest channel

guide at www.xmradio.com or

www.xmradio.ca for the current

list of channels. For information

on receiving this channel,

visit www.xmradio.com or

www.xmradio.ca contact XM

Satellite Radio at 1-800-967-2346

or 1-877-438-9677.

–

Troubleshooting

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-4308CI Seite 95

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-4308CI

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info