Bedienungsanleitung Denon AVR-4310 (Seite 39 von 125) (Englisch)

498659

Zoom out

Zoom in

Vorherige Seite

1/125

Nächste Seite



Getting Started Connections Playback Remote ControlMulti-zone Information Troubleshooting Speciﬁcations

ENGLISH

Setting items Setting contents

Distance

(Continued)

Default : Reset all distance settings to factory default.

Yes : Reset to the defaults.

No : Do not reset to the defaults.

When you select “Default” and press ENTER, the “Return all settings

to the default?” prompt is displayed. Select either “Yes” or “No”,

and press ENTER.

•

Front L / Front R / Center / Subwoofer / Surround A L / Surround A R

/ Surround B L / Surround B R / Surr. Back L

/ Surr. Back R

/ Front

Height L / Front Height R / Front Wide L / Front Wide R : Select the

speaker.

z: When the “Speaker Conﬁguration” – “Surround Back” setting

(vpage 34) is set to “1spkr”, “Surr. Back” is displayed.

0.00m ~ 18.00m / 0.0ft ~ 60.0ft : Set the distance.

Speakers set to “None” in “Speaker Conﬁguration” (vpage 33) are

not displayed.

The speakers that can be selected differ depending on the “Amp Assign”

(vpage 33) and “Speaker Conﬁguration” (vpage 33) settings.

Default settings :

Front / Center / Subwoofer / Front Height / Front Wide : 3.60 m (12.0 ft)

Surround A / Surround B / Surround Back : 3.00 m (10.0 ft)

Set the difference in the distance between the speakers to less than 6.0

meters (20 feet).

•

Channel Level

Set the volume of the test

tone to be the same when it

is output from each speaker.

Surround Speaker : Set the surround speakers to output the test tone.

A : Output test tone from surround speakers A.

B : Output test tone from surround speakers B.

A+B : Output test tone from surround speakers A and B.

Can be set when the “Speaker Conﬁguration” – “Surround A” or

“Surround B” setting is “Large” or “Small” (vpage 34).

•

Test Tone : Output test tone.

Front L / Front Height L / Center / Front Height R / Front R / Front

Wide R / Surround R /Surr. Back R

/Surr. Back L

/ Surround L /

Front Wide L / Subwoofer : Select the speaker.

: When the “Speaker Conﬁguration” – “Surround Back” setting

(vpage 34) is set to “1spkr”, “Surr. Back” is displayed.

–12dB ~ +12dB (0dB) : Adjust the volume.

•

Making Detailed Settings (Manual Setup)

Main remote control

operation buttons

:Displaying the menu

Cancel the menu

:Moves the cursor

(Up/Down/Left/Right)

:Conﬁrm the setting :Return to previous menu

Setting items Setting contents

Channel Level

(Continued)

Speakers set to “None” in the “Speaker Conﬁguration” (vpage 33)

settings are not displayed.

When o is pressed while the subwoofer volume is set to “–12 dB”, the

“Subwoofer” setting switches to “OFF”.

When using surround speakers, be sure to adjust the volume of the

different speakers.

When a headphones jack is inserted in the PHONES terminal of the AVR-

4310, the “Channel Level” is not displayed.

You can also press [CHANNEL LEVEL] to set (vpage 78 “Adjust the

Volume of the Different Speakers“).

•

Default : Reset all channel level settings to factory default.

Yes : Reset to the defaults.

No : Do not reset to the defaults.

•

Crossover Frequency

Outputs at below set

frequency, each speaker’s

bass signal output from

the subwoofer. Set this

according to the low

frequency reproduction

capabilities of the speakers

you are using.

40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz /

250Hz : Set the crossover frequency.

Advanced : Specify crossover frequency for each speaker.

Front / Center / Surround A / Surround B / Surround A+B / Surround

Back / Front Height / Front Wide : Select the speaker.

40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz /150Hz / 200Hz /

250Hz : Set the crossover frequency.

Can be set when the “Speaker Conﬁguration” – “Subwoofer” (vpage

33) setting is “Yes”, or when you have a speaker that is set to “Small”.

Always set the crossover frequency to “80Hz”. When using small

speakers, however, we recommend setting the crossover frequency to

a higher frequency.

For speakers set to “Small”, sound below the crossover frequency is cut

from the sound output. The cut bass sound is output from the subwoofer

or front speakers.

The speakers that can be set when “Advanced” is selected differ

according to the “Subwoofer Mode” setting (vpage 34).

When “LFE” is selected, speakers set to “Small” at “Speaker

Conﬁguration” can be set. If the speakers are set to “Large”, “Full

Band” is displayed and the setting cannot be made.

If set to “LFE+Main”, this setting can be made regardless of the

speaker size.

•

See overleaf

Settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-4310 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-4310

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info