Bedienungsanleitung Denon AVR-4310 (Seite 48 von 125) (Englisch)

498659

Zoom out

Zoom in

Vorherige Seite

1/125

Nächste Seite



Getting Started Connections Playback Remote ControlMulti-zone Information Troubleshooting Speciﬁcations

ENGLISH

Setting items Setting contents

Dimmer

Adjust display brightness of

the receiver.

Bright : Normal display brightness.

Dim : Reduced display brightness.

Dark : Very low display brightness.

OFF : Turns the display off.

Setup Lock

Protect settings from

inadvertent change.

OFF : Turn protection off.

ON : Turn protection on.

When “Setup Lock” is set to “ON”, the settings listed below can no

longer be changed. Also, “SETUP LOCKED!” is displayed if you attempt

to operate related settings.

· GUI menu operations · Dynamic Volume

· RESTORER · Channel Level

· Audio/Video Adjust · Audio Delay

· MultEQ XT · Input Mode

· Dynamic EQ

When canceling the setting, set “Setup Lock” to “OFF”.

•

Maintenance Mode

Used when receiving

maintenance from a DENON

service engineer or custom

installer.

NOTE

Only use this function if so instructed by a DENON serviceperson or

installer.

Firmware Update

Update the ﬁrmware of the

receiver.

Check for Update : You can check for ﬁrmware updates. You can also

check approximately how long it will take to complete an update.

Start : Execute the update process.

When updating starts, the power indicator becomes red and the GUI

screen is shut down. The amount of update time which has elapsed is

displayed.

When updating is complete the power indicator becomes green and

normal status is resumed.

If updating fails, the set automatically retries, but if updating is still not

possible, one of the messages shown below is displayed. If the display

reads as shown below, check the settings and network environment,

then update again.

Display Description

Updating failed Updating failed.

Server is busy Server is busy. Wait a while then try again.

Connection fail Failure connecting to server.

Download fail Downloading of the ﬁrmware has failed.

Making Detailed Settings (Manual Setup)

See overleaf

Main remote control

operation buttons

:Displaying the menu

Cancel the menu

:Moves the cursor

(Up/Down/Left/Right)

:Conﬁrm the setting :Return to previous menu

Setting items Setting contents

Add New Feature

Display the new functions

(payment required) which

can be purchased for

downloading to the AVR-

4310 and upgrade.

When you purchase a

new function and register

your user information,

“Registered” is displayed

on this menu and you can

proceed with the upgrade.

Upgrade : Execute the upgrade process.

When updating starts, the power indicator becomes red and the GUI

screen is shut down. The amount of update time which has elapsed is

displayed.

When updating is complete the power indicator becomes green and

normal status is resumed.

If the upgrade is not successful, an error message identical to those in

“Firmware Update” will appear on the display, check the settings and

network environment, then update again.

Upgrade Status : A list of the additional functions provided by the Upgrade

will be displayed.

When “Not Registered” is displayed on the Add New Feature screen,

you cannot upgrade.

To use the upgrade function, you should purchase an upgrade package

from the DENON website.

To purchase the package, you will need the ID number shown on this

screen.

To display the ID number on the screen, hold <p> and <STATUS>

down for 3 seconds or more.

Notes concerning use of “Firmware Update” and “Add New Feature”

In order to use these functions, you must have the correct system requirements and settings for a

broadband Internet connection.

Do not turn off the power until updating or upgrating is completed.

Even with a broadband connection to the Internet, approximately 1 hour is required for the updating/

upgrading procedure to be completed.

Once updating/upgrade starts, normal operations on the AVR-4310 cannot be performed until updating/

upgrading is completed.

Furthermore, updating/upgrading the ﬁrmware may reset the backup data for the parameters, etc., set

for the AVR-4310.

The following backup data may be erased after an update or upgrade.

•

Internet radio preset channel

•

Internet radio Recently Played data

•

Care of data in Internet radio, media server and USB memory device

In the event of an update error during update or upgrade, turn the AVR-4310’s power off and then on

again. “Update Retry” appears on the display and update restarts from the point at which update failed.

If the error continues despite this, check the network environment.

•

Information regarding the “Firmware Update” function and “Add New Feature” will be announced on

the DENON web site each time related plans are deﬁned.

When usable new ﬁrmware is released with “Firmware Update” or “Add New Feature”, a notiﬁcation

message is displayed on the GUI screen. When you do not want to be notiﬁed, set “Update Notiﬁcation”

(vpage 40) and “Upgrade Notiﬁcation” (vpage 40) to “OFF”.

•

Settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-4310 Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-4310

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info