Bedienungsanleitung Denon AVR-4310 (Seite 53 von 125) (Englisch)

498659

Zoom out

Zoom in

Vorherige Seite

1/125

Nächste Seite



Getting Started Connections Playback Remote ControlMulti-zone Information Troubleshooting Speciﬁcations

ENGLISH

Setting items Setting contents

Input Mode

Set the audio input modes for

the different input sources.

Auto : Automatically detect input signal and perform playback.

HDMI : Play only signals from HDMI input.

Digital : Play only signals from digital input.

Analog : Play only signals from analog input.

EXT. IN : Play only signals from EXT. IN input.

“HDMI” can be set for input sources for which “HDMI” is assigned at

“Input Assign”.

“Digital” can be set for input sources for which “Digital” is assigned at

“Input Assign”.

When digital signals are properly input, the ” ” indicator lights on

the display. If the ” ” indicator does not light, check the digital input

connector assignment and the connections.

The surround mode cannot be set if the input mode is set to “EXT. IN”.

This can also be set by pressing <INPUT MODE>. Each time you press

the button, the input mode display will change.

Auto HDMI Digital

AnalogEXT. IN

•

Decode Mode

Set the decode mode for

input source

This can be set when the input source is

DVD

HDP

SAT/CBL

VCR

DVR

V.AUX

Auto : Detect type of digital input signal and decode and play

automatically.

PCM : Decode and play only PCM input signals.

DTS : Decode and play only DTS input signals.

This can be set for input sources for which “HDMI” or “Digital” is

assigned at “Input Assign” (vpage 47).

Normally set this to “Auto”. Set “PCM” and “DTS” when inputting the

corresponding input signal.

•

The selectable input modes depend on the input source and “Input Assign” (vpage 46) setting.

Making the Input Settings (Source Select)

See overleaf

Changing the Input Mode and Decoding Mode

(Input Mode)

Default settings are underlined.

Setting items Setting contents

i/p Scaler

The input source’s resolution

is converted to the resolution

set at “Resolution”.

Analog : Use i/p scaler function for analog video signal.

Analog & HDMI : Use i/p scaler function for analog and HDMI video

signal.

OFF : Do not use i/p scaler function.

This can be set when “Video Convert” is set to “ON”.

“Analog & HDMI” can be set for input sources for which an HDMI input

terminal is assigned.

When “i/p Scaler” is set to “Analog & HDMI”, it has no effect on the x.v.

Color signal or computer resolutions.

•

Resolution

Set resolution of the video

signal output to HDMI.

Auto : The number of pixels the TV connected to the HDMI output terminal

supports is detected automatically and the appropriate output resolution

is set.

480p/576p / 1080i / 720p / 1080p / 1080p:24Hz : Set the output

resolution.

This can be set when “i/p Scaler” is set to anything other than “OFF”.

When “i/p Scaler” is set to ”Analog & HDMI”, the resolution of both the

analog video input signal and HDMI input signal can be set.

To watch 1080p/24Hz pictures, use a TV that supports 1080p/24Hz video

signals.

When set to “1080p/24Hz”, you can enjoy ﬁlm-like pictures for ﬁlm

sources (in 24 Hz). For video sources and mixed sources, we recommend

setting the resolution to “1080p”.

It is not possible to convert a 50 Hz signal into 1080p/24Hz. It is output

at a resolution of 1080p/50Hz.

•

Progressive Mode

Select optimum progressive

mode for video material.

This can be set when the input source is

DVD

HDP

SAT/CBL

VCR

DVR

V.AUX

Auto : The video material is automatically detected and the appropriate

mode is set.

Video 1 : Select mode suitable for video playback

Video 2 : Select mode suitable for video and 30-frame ﬁlm material

playback.

This can be set when “i/p Scaler” is set to anything other than

“OFF”.

Aspect

Set the aspect ratio for the

video signals output to the

HDMI.

This can be set when the input source is

DVD

HDP

SAT/CBL

VCR

DVR

V.AUX

NET/USB

Full : Output at 16:9 aspect ratio.

Normal : Output at 4:3 aspect ratio.

This can be set when “i/p Scaler” is set to anything other than

“OFF”.

Main remote control

operation buttons

:Displaying the menu

Cancel the menu

:Moves the cursor

(Up/Down/Left/Right)

:Conﬁrm the setting :Return to previous menu

Settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-4310 Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-4310

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info