Bedienungsanleitung Denon AVR-4310 (Seite 79 von 125) (Englisch)

498659

Zoom out

Zoom in

Vorherige Seite

1/125

Nächste Seite



Getting Started Connections Settings Remote ControlMulti-zone Information Troubleshooting Speciﬁcations

ENGLISH

Other Operations and Convenient Functions

When connected to a Blu-ray disc player compatible with DENON LINK

4th, it is possible to play HD audio signals from BDs with no jitter.

NOTE

To play DENON LINK 4th signals, make HDMI and DENON LINK

connections with the compatible Blu-ray disc player.

Set the Blu-ray disc player’s “HDMI Control” setting to “ON”, the

“DENON LINK” setting to “4th”. For instructions on operation, refer

to the Blu-ray disc player’s manual.

When a BD is played with the input mode set to “Auto”, playback

is performed in the DENON LINK 4th mode. When a disc other

than a BD is played with the input mode set to “Auto”, playback is

automatically performed in the DENON LINK 3rd mode.

When the input mode is set to “HDMI”, normal HDMI playback is

performed.

When the input mode is set to “Digital”, playback is ﬁxed to the

DENON LINK 3rd mode and BDs cannot be played.

•

When playing DSD signals in the DIRECT or PURE DIRECT mode,

the DSD signals are converted as such into analog signals. When

playing in other surround modes, the DSD signals are ﬁrst converted

into PCM format, then into analog signals.

“DSD DIRECT” is shown on the display when playing DSD 2-

channel signals in the DIRECT mode. “DSD MULTI DIRECT” is

shown on the display when playing DSD multi-channel signals in the

DIRECT mode.

•

Either assign the input source to be used to “HDMI”

or assign “D.LINK” at the “Digital” setting (vpage

47 “Input Assign”).

Either turn <SOURCE SELECT> or press [INPUT

SOURCE SELECT] to select the input source assigned

in step 1.

The “ ” or “ ” indicator lights on the display.

Use <INPUT MODE> to select the input mode

(vpage 49 “Input Mode”).

Select the input mode according to the program source to be

played.

Select the surround mode (vpage 66 “Selecting the

surround mode).

We recommend playing in the DIRECT mode.b

Start playing the Super Audio CD.

The “ ” indicator lights on the display.

For operating instructions, refer to the respective equipment’s

operating instructions.

Assign “HDMI” to the input source to be used, and

assign “D.LINK” to the “Digital” setting (vpage

47 “Input Assign”).

Set “HDMI Control” – “Control” (vpage 37) to

“ON”.

Either turn <SOURCE SELECT> or press [INPUT

SOURCE SELECT] to select the input source assigned

in step 1.

The “ ” indicator lights on the display.

Select “AUTO” for the <INPUT MODE> (vpage 49

“Input Mode”).

Select the surround mode (vpage 66 “Selecting the

Surround Mode (Surround Mode)”).

Start playing the BD.

Playback starts.

Button located on both the main unit

and the remote control unit

BUTTON

Button only on the main unit

Button only on the remote control unit

[BUTTON]

Symbols used to indicate buttons in this manual

Other Operations

Playing a Blu-ray Disc Player Compatible

with DENON LINK 4th

Playing Super Audio CD

Playback

[INPUT

SOURCE

SELECT]

[ MAIN]

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-4310 Seite 79

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-4310

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info