584369
5
Zoom out
Zoom in
Vorherige Seite
1/122
Nächste Seite
2
Connections Settings Playback Remote ControlMulti-zone Information Troubleshooting Specifi cations
Perform the operations leading to playback on the AVR-4310CI in the
order shown below.
Audyssey Auto Setup (vpage 28)
Connections
Installing/Setting the Speakers
(vpage 11)
Speaker Connections (vpage 13)
Connecting Devices (vpage 14)
Turning the Power On (vpage 24)
Settings
Manual Setup (vpage 34)
Perform “Manual Setup” as necessary.b
Source Select (vpage 46)
Playback
Playing Components (vpage 53)
Selecting the Surround Mode (vpage 71)
Adjusting the Sound and Picture Quality
(vpage 73)
Flow of Operations Through
Playback
Cautions on Handling
Before turning the power switch on
Check once again that all connections are correct and that there are
no problems with the connection cables.
Power is supplied to some of the circuitry even when the unit is
set to the standby mode. When traveling or leaving home for long
periods of time, be sure to unplug the power cord from the power
outlet.
About condensation
If there is a major difference in temperature between the inside of
the unit and the surroundings, condensation (dew) may form on
the operating parts inside the unit, causing the unit not to operate
properly.
If this happens, let the unit sit for an hour or two with the power
turned off and wait until there is little difference in temperature
before using the unit.
Cautions on using mobile phones
Using a mobile phone near this unit may result in noise. If so, move
the mobile phone away from this unit when it is in use.
Moving the unit
Turn off the power and unplug the power cord from the power
outlet.
Next, disconnect the connection cables to other system units before
moving the unit.
Note that the illustrations in these instructions may differ from the
actual unit for explanation purposes.
Cautions on Installation
Note:
For proper heat dispersal, do not install this unit in a confi ned
space, such as a bookcase or similar enclosure.
b
b Note
b b
Getting Started
Getting Started
List of preset codes ··································End of this manual
Wall
Operating the Connected Devices by Remote
Control Unit
Operating the Main Remote Control Unit ································ 89
Operating AV Equipment ····························································89
Presetting ····················································································90
Operating Preset Components ···················································90
Setting the Remote ID ································································93
Learning Function ·······································································94
MACRO Function ········································································94
Punch Through Function ······························································ 95
Setting the Time the Backlight Stays Lit ·····································95
Adjusting the Backlight’s Brightness ···········································95
Specifying the Zone Used with the Main Remote Control ·········96
Resetting the Main Remote Control Unit ···································96
Operating the Sub Remote Control Unit ··································97
Switching Zones ·········································································98
Switching the Multi-zone Input Source to the Same
Input Source as Used in the MAIN ZONE ··································98
Setting the Zone for Which the Sub Remote Control Unit is
Used (ZONE SELECT LOCK Mode) ············································98
Setting the Remote ID ································································98
Resetting the Settings ································································98
Other Information ·······························································99
Troubleshooting·································································108
Restoring All the Settings to as They were at the Time of
Purchase (Resetting the Microprocessor) ······························· 111
Specifi cations ······································································112
1.AVR4310CIEU.indd 2 2009/04/14 16:35:50
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Denon AVR-4310CI wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Denon AVR-4310CI

Denon AVR-4310CI Kurzanleitung - Englisch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info