22
3Select the desired unit, feet or meters.
Select (darken) the desired units, “Feet” or “Meters”.
4Once “Feet” or “Meter” is selected in Step 3, the
Delay Time screen appears automatically.
5Select the speaker to be set.
Example: When “Feet” is selected
6Set the distance between the
center speaker and listening
position.
The distance changes in units of 1
foot (0.1 meters) each time the
button is pressed. Select the value
closest to the measured distance.
If “Yes” is selected for “Default”, the settings are automatically reset
to the default values.
Please note that the difference of distance for every speaker should be 20
ft (6.0 m) or less. If you set an invalid distance, a CAUTION notice, such
as screen right will appear. In this case, please relocate the blinking
speaker(s) so that its distance is no larger than the value shown in
highlighted line.
Example: When the distance is set to 12 feet
for the center speaker
7Enter the setting.
The System Setup Menu reappears.
The AVR-4802R automatically sets the optimum surround delay time for the listening room.
