498716

Denon AVR-4810 Seite 126

126
Zoom out
Zoom in
Vorherige Seite
1/144
Nächste Seite

Getting Started Connections Settings Playback Remote ControlMulti-zone Information Troubleshooting SpecificationsTroubleshooting
ENGLISH
Symptom Cause / Countermeasure Page
When a USB memory
device is connected,
“USB” is not
displayed on the GUI
menu.
The set cannot recognize a USB memory device. Check the
connection.
A USB memory device not conforming to mass storage class or
MTP standards is connected. Connect a USB memory device
conforming to mass storage class or MTP standards.
The set port and the connected port do not match. Connect to the
port set at “USB Select”.
A USB memory device that the set cannot recognize is connected.
This is not a malfunction. DENON does not guarantee that all
USB memory devices will operate or receive power.
USB memory device is connected via USB hub. Connect the USB
memory device directly to the USB port.
•
•
•
•
•
23
–
62
–
–
Files on a USB
memory device
cannot be played.
USB memory device is in format other than FAT16 or FAT32.
Set the format to FAT16 or FAT32. For details, refer to the USB
memory device’s operating instructions.
USB memory device is divided into multiple partitions. When
divided into multiple partitions, only files stored in the top partition
can be played.
Files are stored in a non-compatible format. Record the files in a
compatible format.
You are attempting to play a file that is copyright protected. Files
that are copyright protected cannot be played on this set.
•
•
•
•
–
–
70
70
The file names are
not displayed properly
(“...”, etc.).
Characters that cannot be displayed are used. This is not a
malfunction. On this set, characters that cannot be displayed are
replaced with a “ . (period)”.
• –
Internet radio cannot
be played.
Ethernet cable is not properly connected or network is
disconnected. Check the connection status.
Program is being broadcast in non-compatible format. Only
Internet radio programs in MP3 and WMA can be played on this
set.
The computer’s or router’s firewall is activated. Check the
computer’s or router’s firewall settings.
Radio station is not currently broadcasting. Choose a radio station
that is currently broadcasting.
IP address is wrong. Check the set’s IP address.
•
•
•
•
•
25, 26
69, 70
–
71, 72
50
Files stored on a
computer cannot be
played.
Files are stored in a non-compatible format. Record in a compatible
format.
You are attempting to play a file that is copyright protected. Files
that are copyright protected cannot be played on this set.
Set and computer are connected by USB cable. The set’s USB
port cannot be used for connection to a computer.
•
•
•
69, 70
69
–
GNET/USB / NapsterH
Symptom Cause / Countermeasure Page
Server is not found,
or it is not possible to
connect to the server.
The computer’s or router’s firewall is activated. Check the
computer’s or router’s firewall settings.
Computer’s power is not turned on. Turn on the power.
Server is not running. Launch the server.
Set’s IP address is wrong. Check the set’s IP address.
•
•
•
•
–
–
–
50
iPod cannot be
played.
Some iPods do not support being used connected directly to the
USB port.
• 23
Cannot connect to
preset or favorite
radio stations.
Radio station is not currently broadcasting. Wait a while before
trying again.
Radio station is not currently in service. It is not possible to
connect to radio stations that are no longer in service.
•
•
–
–
For some radio
stations, “Server
Full” or “Connection
Down” is displayed
and station cannot be
connected to.
Station is congested or not currently broadcasting. Wait a while
before trying again.
• –
Sound is broken
during playback.
Network’s signal transfer speed is slow or communications lines
or radio station is congested. This is not a malfunction. When
playing broadcast data with a high bit rate, the sound may be
broken, depending on the communications conditions.
• –
Sound quality is poor
or played sound is
noisy.
File being played has a low bit rate. This is not a malfunction.• –
Cannot compile
Playlist.
The AVR-4810 does not respond to playlist compilation. When
the playlist is compiled in PC Application, it is registered to “My
Library”. In this way, the playlist can be played in AVR-4810.
• –
Cannot delete Tracks,
Playlists, Channels
registered in “My
Library”.
Cannot be done with AVR-4810. Delete from PC Application.• –
Cannot login to
Napster. (“Incorrect
Username or
Password” is
displayed.)
Login information is incorrect. Check if the Username for Napster
has been properly entered. Re-enter the Password. (Password is
not displayed.)
http://www.napster.com/choose/index_default.html
• 50
… 126 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

denon-avr-4810

Suche zurücksetzen

  • Hallo, bekommt man auch das Orginal-Handbuch für den AVR 4810???
    Gruss R.H.Lutz Eingereicht am 6-9-2020 20:55

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Denon AVR-4810 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Denon AVR-4810

Denon AVR-4810 Bedienungsanleitung - Deutsch - 144 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info