(left) button (right) button
Press the ENTER or (down) button to enter the settings and switch to the Speaker Distance setting.
•Parameters
Large…… Select this when using speakers that have sufficient performance for reproducing bass sound below the frequency set for the
Crossover Frequency mode.
Small…… Select this when using speakers that do not have sufficient performance for reproducing bass sound below the frequency set for
the Crossover Frequency mode. When this is set, bass sound with a frequency below the frequency set for the Crossover
Frequency mode is sent to the subwoofer.
None…… Select this when no speakers are installed.
Yes/No…. Select “Yes” when a subwoofer is installed, “No” when a subwoofer is not installed.
If the subwoofer has sufficient low frequency playback capacity, good sound can be achieved even when “Small” is set for the front, center
and surround speakers.
(Initial)
4Use the (left) and (right) buttons to select your surround back speaker type.
(left) button (right) button
Press the ENTER or (down) button to switch to the subwoofer setting.
(Initial)
NOTE:
•When “Small” has been selected for the surround speakers, “Large” cannot be selected for the surround back speakers.
3Use the (left) and (right) buttons to select your surround speaker type.
(left) button (right) button
Press the ENTER or (down) button to switch to the surround back speaker setting.
(Initial)
NOTE:
•When “Small” has been selected for the front speakers, “Large” cannot be selected for the surround speakers.
ENGLISH
