Bedienungsanleitung Denon AVR-550SD (Seite 14 von 96) (Deutsch)

498717

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

ENGLISH

Setting the channel level

• Use this setting to adjust to that the playback level between the different channel is equal.

• From the listening position, listen to the test tones produced from the speakers to adjust the level.

• The level can also be adjusted directly from the remote control unit. (For details, see page 23.)

• When connecting a commercially available pre-main amplifier to the surround backup pre-out connectors and

using a surround backup speaker, the level changes when the pre-main amplifier’s volume control is adjusted,

so adjust the volume with the pre-main amplifier’s volume control in function of this setting.

Set the mode.

Select “Auto” or “Manual”.

T.TONE

T 1

• Auto:

Adjust the level while listening to the test tones

produced automatically from the different speakers.

• Manual:

Select the speaker from which you want to produce the test tone to adjust the

level.

Press the (down) button and select “Yes” to start Test Tone.

a. If the “Auto” mode is selected:

Test tones are automatically emitted from the different speakers.

The test tones are emitted from the different speakers in the following order, at

4-second intervals the first time and second time around, 2-second intervals the

third time around and on:

FL C FR SR SB SL SW

Use the CURSOR left and right buttons to adjust all the speakers to the same

volume.

The volume can be adjusted between –12 dB and +12 dB in units of 1 dB.

b. When the “Manual” mode is selected

Use the CURSOR up and down to select the

speaker for which you want to output test tones,

then use the CURSOR left and right to adjust so

that the volume of the test tones from the various

speakers is the same.

Example:

When the volume is set to –12

dB while the Front Lch speaker is

selected

Press the ENTER button to enter the setting and switch the DIGITAL INPUT

setting.

NOTES:

• When you adjust the channel levels while in the TEST TONE mode, the channel level adjustments made

will affect all surround modes. Consider this mode a Master Channel Level adjustment mode.

• You can adjust the channel levels for each of the following surround modes: DIRECT, STEREO, DOLBY/DTS

SURROUND, 5/6 CH STEREO, MONO MOVIE, ROCK ARENA, JAZZ CLUB, VIDEO GAME, MATRIX and

DOLBY VIRTUAL SPEAKER.

Setting the Digital In Assignment

• This setting assigns the digital input jacks of the AVR-550SD for the different input sources.

Select the digital input jack to be assigned to the

input source.

• To select the digital input jack

17 COAX

• To select the input source

Select “OFF” if nothing is connected.

Press the ENTER button to enter the setting and switch the COMPONENT VIDEO

INPUT setting.

NOTE:

• TUNER cannot be selected.

T.TONE ST<Y SE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-550SD Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info