Bedienungsanleitung Denon AVR-550SD (Seite 19 von 96) (Deutsch)

498717

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

ENGLISH

OPERATION

Before operating

When pressed, the power turns on and the

display lights. The sound is muted for several

seconds, after which the unit operates

normally.

When pressed again, the power turns off, the

standby mode is set and the display turns off.

Whenever the ON/STANDBY button is in the

STANDBY state, the apparatus is still

connected on AC line voltage. Please be sure

to unplug the cord when you leave home for,

say, a vacation.

Refer to “CONNECTIONS” (pages 6 to 10) and

check that all connections are correct.

(Main unit) (Remote control unit)

Playing the input source

1,3

Select the input source to be played.

AUTO PCM DTS

• Selecting the external input (EXT. IN) mode

Press the EXT. IN to switch the external input.

• Selecting the AUTO, PCM and DTS modes

The mode switches as shown below each

time the INPUT MODE button is pressed.

Input mode selection function

Different input modes can be selected for the different

input sources. The selected input modes for the

separate input sources are stored in the memory.

q AUTO (auto mode)

In this mode, the types of signals being input to the

digital and analog input jacks for the selected input

source are detected and the program in the AVR-

550SD’s surround decoder is selected automatically

upon playback. This mode can be selected for all

input sources other than TUNER.

The presence or absence of digital signals is

detected, the signals input to the digital input jacks

are identified and decoding and playback are

performed automatically in DTS, Dolby Digital or

PCM (2 channel stereo) format. If no digital signal is

being input, the analog input jacks are selected.

Use this mode to play Dolby Digital signals.

w PCM (exclusive PCM signal playback mode)

Decoding and playback are only performed when

PCM signals are being input.

Note that noise may be generated when using this

mode to play signals other than PCM signals.

e DTS (exclusive DTS signal playback mode)

Decoding and playback are only performed when

DTS signals are being input.

r ANALOG (exclusive analog audio signal playback

mode)

The signals input to the analog input jacks are

decoded and played.

t EXT. IN (external decoder input jack selection mode)

The signals being input to the external decoder

input jacks are played without passing through the

surround circuitry.

Select the input mode.

• Selecting the analog mode

Press the ANALOG button to switch to the

analog input.

FUNCTION / SELECT

(Main unit) (Remote control unit)

(Remote control unit)

Set the remote control unit’s slide switch to the

AUDIO position. (only when operating with the

remote control unit)

Turn on the power.

Press the power operation switch (button).

(Main unit)

Example: DVD

Light

Power operation indicator

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-550SD Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info