Bedienungsanleitung Denon AVR-550SD (Seite 26 von 96) (Deutsch)

498717

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

ENGLISH

Set the various surround parameters.

(Remote control unit)

Press the SURROUND PARAMETER button to

finish surround parameter mode.

(Remote control unit)

Surround parameters q

Pro Logic

II (IIx) Mode:

• The Cinema mode is for use with stereo television shows and all programs encoded Dolby Surround.

• The Music mode is recommended as the standard mode for autosound music systems (no video), and is

optional for A/V systems.

• The Pro Logic mode offers the same robust surround processing as original Pro Logic in case the source

contents is not of optimum quality.

Select one of the modes (“cinema”, “music” or “game”).

Panorama Control:

This mode extends the front stereo image to include the surround speakers for an exciting “wraparound”

effect with side wall imaging.

Select “OFF” or “ON”.

Dimension Control:

This control gradually adjust the soundfield either towards the front or towards the rear.

The control can be set in 7 steps from 0 to 6.

Center Width Control:

This control adjust the center image so it may be heard only from the center speaker; only from the left/right

speakers as a phantom image; or from all three front speakers to varying degrees.

The control can be set in 8 steps from 0 to 7.

DTS NEO:6 Mode:

• Cinema

This mode is optimum for playing movies. Decoding is performed with emphasis on separation

performance to achieve the same atmosphere with 2-channel sources as with 6.1-channel sources.

This mode is effective for playing sources recorded in conventional surround formats as well, because the

in-phase component is assigned mainly to the center channel (C) and the reversed phase component to the

surround (SL, SR and SB channels).

• Music

This mode is suited mainly for playing music. The front channel (FL and FR) signals bypass the decoder

and are played directly so there is no loss of sound quality, and the effect of the surround signals output

from the center (C) and surround (SL, SR and SB) channels add a natural sense of expansion to the sound

field.

CENTER IMAGE (0.0 to 0.5: default 0.2):

The center image parameter for adjusting the expansion of the center channel in the DTS NEO:6 MUSIC

mode has been added.

Surround parameters w

CINEMA EQ. (Cinema Equalizer):

The Cinema EQ function gently decreases the level of the extreme high frequencies, compensating for

overly-bright sounding motion picture soundtracks. Select this function if the sound from the front speakers

is too bright.

This function only works in the Dolby Pro Logic IIx, Dolby Digital, DTS Surround, DTS NEO:6 and WIDE

SCREEN modes. (The same contents are set for all operating modes.)

D.COMP. (Dynamic Range Compression):

Motion picture soundtracks have tremendous dynamic range (the contrast between very soft and very loud

sounds). For listening late at night, or whenever the maximum sound level is lower than usual, the Dynamic

Range Compression allows you to hear all of the sounds in the soundtrack (but with reduced dynamic range).

(This only works when playing program sources recorded in Dolby Digital or DTS.) Select one of the four

parameters (“OFF”, “LOW”, “MID” (middle) or “HI” (high)). Set to OFF for normal listening.

LFE (Low Frequency Effect):

This sets the level of the LFE (Low Frequency Effect) sounds included in the source when playing program

sources recorded in Dolby Digital or DTS.

If the sound produced from the subwoofer sounds distorted due to the LFE signals when playing Dolby Digital

or DTS sources when the peak limiter is turned off with the subwoofer peak limit level setting (system setup

menu), adjust the level as necessary.

Program source and adjustment range:

1. Dolby Digital: –10 dB to 0 dB

2. DTS Surround: –10 dB to 0 dB

When DTS encoded movie software is played, it is recommended that the LFE LEVEL be set to 0

dB for correct DTS playback.

When DTS encoded music software is played, it is recommended that the LFE LEVEL be set to –10

dB for correct DTS playback.

TONE:

This adjusts the tone control. This can be set individually for the separate shroud mode other than Pure direct

and direct mode.

AFDM (Auto Flag Detect Mode):

ON .......This function only works with software on which a special identification signal is recorded. This

software is scheduled to go on sale in the future.

This is a function for automatically playing in the 6.1-channel mode using the surround back

speakers if the software is recorded in DTS-ES or in the normal 5.1-channel mode without using

the surround back speakers when the software is not recorded in DTS-ES.

OFF......Set the “OFF” mode to perform 6.1-channel playback with conventional 5.1-channel sources or

sources on which the identification signal described below is not recorded.

SB CH OUT:

(1) (Multi channel source)

“OFF”...........................Playback is conducted without using the surround back speaker.

“NON MTRX” ..............The same signals those of the surround channels are output from the surround

back channels.

“MTRX ON”.................Surround back channel is reproduced using digital matrix processing.

“ES MTRX”..................When playing DTS signals, the surround back signals undergo digital matrix

processing for playback.

“ES DSCRT” ................When a signal identifying the source as a discrete 6.1-channel source is included

in the DTS signals, the surround back signals included in the source are played.

“PL IIx Cinema”...........Processing is performed with the Cinema mode of the PL IIx decoder and the

Surround Back channel is reproduced.

“PL IIx Music”.............Processing is performed with the Music mode of the PL IIx decoder and the

Surround Back channel is reproduced.

(2) (2ch source)

“OFF” ......................Playback is conducted without using the surround back speaker.

“ON”........................Playback is conducted using the surround back speaker.

NOTE: This operation can be performed directly using the “SURROUND BACK” button on the main unit’s

panel.

Denon AVR-550SD Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info