26
7SYSTEM SETUP
•Once all connections with other AV components have been completed as described in “CONNECTIONS” (see pages 9~21), make the various
settings described below on the monitor screen using the AVR-5805’s on-screen display function.
These settings are required to set up the listening room’s AV system centered around the AVR-5805.
SYSTEM SETUP button
Press this to display the system setup menu.
ENTER button
Press this to switch the display.
Also use this button to complete the setting.
CURSOR buttons
Use these to move the cursors the left, right, up and down on
the screen.
1Check that the remote control unit set to AMP mode.
2
2Use the following buttons to set up the system
2System setup items and default values (set upon shipment from the factory)
1. Auto Setup/Room EQ
Auto Setup / Room EQ Default settings
1Auto Setup
Room EQ
Setup
2
Direct Mode
Setup
4
Set the ON/OFF setting of Room EQ, in the case of the surround
mode is in Direct or Pure Direct.
3
Mic Input
Select
Set this to switch the Mic Input jack for use for Mic or V.AUX L-
channel input jack.
This unit performs an analysis of the speaker system and measures
the acoustic characteristics of your room to permit an appropriate
automatic setting.
Set the Room EQ setting with All or Assign for each surround mode.
–
All, Room EQ = OFF
OFF
Mic
Page
33~39
40, 41
41
42, 43
NOTES:
•The AVR-5805’s on-screen display function is designed for use with high resolution monitor TVs, so it may be difficult to read small
characters on TVs with small screens or low resolutions.
•The setup menu is not displayed when headphones are being used.
