Bedienungsanleitung Denon AVR-588 (Seite 23 von 63) (Englisch)

584389

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

0

Getting Started Connections Playback Remote Control Multi-Zone Information Troubleshooting

ENGLISH

Setup

Example of Display of Default

Values

[Selectable items] Large Small

In lists of selectable items or adjustable ranges, the item

surrounded by a border is the default value.

Speaker Setup

Perform this setting if you wish to make the settings for your

speaker systems manually.

a ~ h Speaker Conﬁ guration

j Subwoofer Mode Setup

k ~ A5 Distance

A6 Crossover Frequency

A7 Test Tone

Center Speaker

Select center speaker use and size.

[Selectable items] Large Small None

• Select “Large” or “Small” not according to the physical size of the

speaker but according to the low frequency reproduction capabilities

based on the frequency set at “Crossover Frequency” (vpage

21).

• When “Front Speaker” is set to “Small”, “Subwoofer” is automatically

set to “Yes”.

• If “Subwoofer” is set to “No”, “Front Speaker” is automatically set to

“Large”.

• If “Surround Speaker” is set to “None”, “Surround Back Speaker” are

automatically set to “None”.

• When using just one surround back speaker, connect it to the left

channel (SBL).

Subwoofer Mode Setup

Select low range signal to be reproduced by subwoofer.

[Display]

1.Sp 2.In 3.Op

Speaker Setup

7 SW Mode Norm

• This can be set when “System Setup” – “Speaker Setup” –

“Subwoofer” is set to “Yes”.

• Play music or a movie source and select the mode offering the

strongest bass.

• Select “LFE+Main” if you want the bass signals to always be

produced from the subwoofer.

[Selectable items]

LFE (Normal) : Play low range and LFE signal of channels set to

“Small”.

LFE+Main : Play low range and LFE signal of all channels.

Large : Select this when using large speakers with ample low

frequency reproduction capabilities.

Small : Select this when using small speakers without ample low

frequency reproduction capabilities.

None : Select this when no speaker is connected.

Yes : Select this when a subwoofer is connected.

No : Select this when no subwoofer is connected.

2spkrs 1spkr :

Select the number of surround back speakers.

NOTE

By default, the AVR-588’s “Amp Assign” setting is set to “ZONE2”. To

use as the surround back speaker for the main zone, change the “Amp

Assign” setting (vpage 24).

Subwoofer

Select subwoofer use.

[Selectable items] Yes No

Surround Speaker

Select surround speakers use and size.

[Selectable items] Large Small None

Surround Back Speaker

Select surround back speaker use and size.

[Selectable items]

(

Large Small None

)

(

2spkrs 1spkr

)

a ~ h Speaker Conﬁ guration

Select speaker conﬁ guration and size.

(bass reproduction capability)

[Display]

1.Sp 2.In 3.Op

Speaker Setup

1 Front Large

6 Subwoofer Yes

Front Speaker

Select front speaker size.

[Selectable items] Large Small

Operations (vpage 19)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-588 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-588

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info