Bedienungsanleitung Denon AVR-590 (Seite 15 von 67) (Englisch)

455822

Zoom out

Zoom in

Vorherige Seite

1/67

Nächste Seite

2

ENGLISH

Getting Started

Playback Remote Control Information Troubleshooting

SpeciﬁcationsSettings

Connecting Devices

NOTE

These functions will not work if the device connected to the HDMI

connector does not support Deep Color or x.v.Color signal transfer or

the Auto Lip Sync function.

NOTE

When a device that does not support HDCP is connected, video

signals are not properly output.

Connecting Devices Equipped with

HDMI connectors

Important Information

n About HDMI

“HDMI” is the abbreviation of “High Deﬁnition Multimedia

Interface”. This interface allows transfer of digital video signals

and digital audio signals over a single HDMI cable.

n Functions usable with HDMI connections

Deep Color

Eliminates on-screen color banding, for smooth tonal transitions and

subtle gradations between colors.

x.v.Color

Enables displays with natural, vivid colors. “x.v.Color” is a Sony

registered trademark.

Auto Lip Sync (vpage 27)

HDMI 1.3 incorporates an automatic video/audio synching capability

that allows devices to perform this synchronization automatically with

total accuracy.

HDMI control function (vpage 27, 44)

This function allows you to operate external devices from the receiver

and operate the receiver from external devices.

“HDMI”, “HDMI logo” and “High-Deﬁnition Multimedia Interface”

are trademarks or registered trademarks of HDMI Licensing LLC.

NOTE

• Connect the speaker cables in such a way that they do not stick out

of the speaker terminals. The protection circuit may be activated if

the core wires touch the rear panel or if the + and – sides touch each

other (v “Protection circuit”).

• Never touch the speaker terminals while the power

supply is connected. Doing so could result in electric shock.

Peel off about 10 mm of sheathing from the tip

of the speaker cable, then either twist the core

wire tightly or terminate it.

Turn the speaker terminal counterclockwise

to loosen it.

Insert the speaker cable’s core wire to the hilt

into the speaker terminal.

 Turn the speaker terminal clockwise to tighten

it.

Use speakers with an impedance of 6 to 16 Ω/ohms.

n When using a banana plug

Tighten the speaker terminal ﬁrmly before

inserting the banana plug.

Connecting the Speaker Cables

Carefully check the left (L) and right (R) channels and + (red) and –

(black) polarities on the speakers being connected to the AVR-590, and

be sure to interconnect the channels and polarities correctly.

n Copyright protection system (HDCP)

The AVR-590 supports HDCP (High-bandwidth Digital Contents

Protection). HDCP is a copyright protection technology for digital video

signals. The devices connected to the AVR-590 must also support

HDCP.

Connecting the Speakers

Protection circuit

If the core wires touch the rear panel and the screws etc., or the ±

sides touch each other, the protection circuit will be activated and the

power indicator will ﬂash red at intervals of 0.5 secs.

If the protection circuit is activated, the speaker output is isolated, and

the power supply goes to the standby state. If the power supply is

turned off, after the power supply cord is withdrawn, please conﬁrm

that speaker cable and input cable are connected.

Also, if replaying large sound levels by using a speaker having an

impedance less than that speciﬁed (eg, 4 Ω/ohms), the temperature

will rise, and the protection circuit might be activated. The power

supply will go into the standby state, and the power indicator will ﬂash

red at 2 second intervals.

In this case, please switch off the power supply, and wait until the

AVR-590 has cooled down, and the surrounding ventilation is good.

Even if there are no problems with the surrounding ventilation

and connections, in the event of the protection circuit becoming

activated,

due to thinking that the AVR-590 has failed, please contact DENON

Service center after switching off.

Connections

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-590 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-590

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info