Bedienungsanleitung Denon AVR-590 (Seite 24 von 67) (Englisch)

455822

Zoom out

Zoom in

Vorherige Seite

1/67

Nächste Seite

2

ENGLISH

Getting Started Connections Playback Remote Control Information Troubleshooting Speciﬁ cations

Making the Optimum Settings for the Connected Speakers Automatically (Audyssey Auto Setup)

Perform Step 4 repeatedly for the 3rd, 4th, 5th, and

6th measurments.

Once measurements for the sixth position are completed, “All

the measurements were ﬁ nished.” is displayed.

b Measure at a total of six positions, including the main listening

position and positions around it. It is possible to stop the settings

with ﬁ ve positions or fewer, but for better results we recommend

measuring at six positions.

Once measurements

are ﬁ nished, use ui

to select “Calculate”,

then press .

Analysis begins.

b Analysis takes several

minutes to complete.

The time required for

this analysis depends on

the number of speakers

connected. The greater

the number of speakers

connected, the longer

analysis will take.

Use ui to select the item you want to check, then

press .

The measurement result

conﬁ rmation screen is

displayed.

b Subwoofers or other

speakers may be set to

a value that does not

correspond to the actual

distance.

Step 3 : Performing the Audyssey Auto Setup Procedure

• The Audyssey Auto Setup function detects the presence of each

speaker and automatically calculates the speaker size, channel

level, distance, and optimal crossover frequency setting. Audyssey

MultEQ corrects acoustical distortions within the listening area.

• Once started, MultEQ will play a series of test tones through each

speaker.

• Before starting, connect and position all of your speakers.

Step2:Measurement

MultEQ

Retry

Cancel

[ENT]:Cancel

Calculate

All the measurements

were finished.

Step3:Calculating

MultEQ

Calculating

[----------]

Please wait...

⇩

Step4:Check

MultEQ

Please check the results

of the measured item.

Distance Check

Channel Level Check

Crossover Freq.Check

Speaker Config.Check

[ENT]:Select

Press ui to select

“Start”, then press

Detection of the speaker

conﬁ guration starts.

Once all the speakers

have been detected

and the screen on

the right appears,

check the results

of detection of the

connected speakers.

Once you have checked the results, use ui to select

“Next”, then press .

Measurements for the main listening position begin.

Once the screen on

the right appears,

move the setup

microphone to the

second position, use

ui to select “Next”,

then press .

Measurements for the second position begin.

3-1.Audyssey Auto Setup

MultEQ

at ear height at

Normal

Pre Assign:

Start

Cancel

[ENT]:Select [RTN]:Back

Please place microphone

main listening position.

Retry

[ENT]:Next

Front Sp. :Yes

Center Sp. :Yes

Subwoofer :Yes

Surround Sp. :Yes

S.Back Sp. :Yes

:2sp

Step1:Speaker Detection

MultEQ

Step2:Measurement

MultEQ

Please place microphone

Cancel

[ENT]:Next

Calculate

2nd listening position.

at ear height at

Press ui to select “Pre Assign”.

Press o p to select

Pre Assign Mode.

Normal

: The sound of the surround back channel is output

from the SURR. BACK / FRONT HEIGHT PRE

OUT connectors.

Front Height

: The sound of the front height channel is output

from the SURR. BACK / FRONT HEIGHT PRE

OUT connectors.

3-1.Audyssey Auto Setup

MultEQ

at ear height at

Normal

Pre Assign:

Start

Cancel

[ENT]:Select [RTN]:Back

Please place microphone

main listening position.

3-1.Audyssey Auto Setup

MultEQ

at ear height at

Normal

Pre Assign:

Start

Cancel

[ENT]:Select [RTN]:Back

Please place microphone

main listening position.

Changing the PRE OUT connectors assignment

(Pre Assign)

The signals output from the AVR-590’s SURR. BACK / FRONT HEIGHT

PRE OUT connectors can be switched to signals of the surround mode

being used.

n To cancel Audyssey Auto Setup

Use ui to select “Cancel”, then use o p to select “Yes”.

Settings

Step 2 : Audyssey Auto Setup

Preparations

around items indicate the settings made upon purchase.

If adjustment to the environment is necessary, set the following

items before proceeding.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-590 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-590

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info