Bedienungsanleitung Denon AVR-590 (Seite 28 von 67) (Englisch)

455822

Zoom out

Zoom in

Vorherige Seite

1/67

Nächste Seite

2

Getting Started Connections Playback Remote Control Information Troubleshooting Speciﬁcations

ENGLISH

Making detailed settings (Manual Setup)

Setting items Setting contents

Speaker Conﬁg.

Select speaker conﬁguration

and size.

(bass reproduction capability)

“S.Back” is displayed

when the “Pre Assign”

setting (vpage 24) is

set to “Normal”.

“Front Height” is

displayed when the “Pre

Assign” setting (vpage

24) is set to “Front

Height”.

NOTE

Select “Large” or “Small” not

according to the physical size

of the speaker but according

to the low frequency

reproduction capabilities

based on the frequency set

at “Crossover Frequency”

(vpage 26).

Surround : Set the presence and size of the Surround speakers.

Large : Use of a large speaker that can adequately play back low

frequencies.

Small : Use of a small speaker that has inadequate playback capacity for

low frequencies.

None : Select when the surround speakers are not connected.

“Large” is not displayed when “Front” is set to “Small”.

•

S.Back (Pre out) : Set the presence, size and number of surround back

speakers.

Large : Use of a large speaker that can adequately play back low

frequencies.

Small : Use of a small speaker that has inadequate playback capacity for

low frequencies.

None : Select when the surround back speakers are not connected.

2ch : Use two surround back speakers.

1ch : Use only one surround back speaker. Surround back audio is output

from the SURR. BACK / FRONT HEIGHT PRE OUT “L” connector.

• “Large” is not displayed when “Surround” is set to “Small”.

 • Even if “S.Back” is set to “Large”, the “S.Back” setting is automatically

switched to “Small” if “Surround” is set to “Small”.

NOTE

Even when the Surround Back Speaker setting is other than “None”,

sound may not be emitted from the surround back speaker, depending

on the playback source. In this case, “Surround Back” setting other

than “OFF” (vpage 40).

•

Front Height (Pre out) : Set the front height speaker size.

Large : Use of a large speaker that can adequately play back low

frequencies.

Small : Use of a small speaker that has inadequate playback capacity for

low frequencies.

None : Select when a front height speaker is not connected.

• “Large” is not displayed when “Front” is set to “Small”.

• Even if “Front Height” is set to “Large”, the “Front Height” setting

is automatically switched to “Small” if “Front” is set to “Small”.

•

Setting items Setting contents

Bass Setting

Make the settings related to

playback of low frequency

signals (subwoofer and LFE).

This can be set when

“Speaker Conﬁg.” –

“Subwoofer” (vpage

24) is set to “Yes”.

Subwoofer Mode : Select low range signal to be reproduced by

subwoofer.

LFE : Add the low frequency signal of the channel for which the speaker

size is set to “Small” to the subwoofer signal and output it.

LFE+Main : Add the low frequency signal of all channels to the subwoofer

signal and output it.

• Play music or a movie source and select the mode offering the

strongest bass.

• Select “LFE+Main” if you want the bass signals to always be

produced from the subwoofer.

•

LPF for LFE : Set the upper limit of the low frequency signals output from

the subwoofer.

80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz•

Distance

Set the distance from the

listening position to the

speakers.

Measure the distance from

the listening position to the

speakers beforehand.

Unit : Set the unit of distance.

Feet

Meters

•

Step : Set the minimum variable width of the distance.

1ft / 0.1ft

0.1m / 0.01m

•

(Front L)/ FR (Front R)/ C (Center)/ SW (Subwoofer)/ SL (Surround L)/

SR (Surround R/ SBL (Surr. Back L)/ SBR (Surr. Back R)/ FHL (Front Height L)/

FHR (Front Height R) : Select the speaker you want to set, and set the

distance. Set the value that is closest to the measured distance.

0.0ft ~ 60.0ft / 0.00m ~ 18.00m

• The speakers that can be selected differ depending on the “Pre Assign”

(vpage 24) and “Speaker Conﬁg.” settings.

• Default settings :

Front/Center/Subwoofer/Front Height : 3.6 meters (12 feet)

Surround/Surr. Back : 3.0 meters (10 feet)

NOTE

Set the difference in the distance between the speakers to less than 6.0

meters (20 feet). “Relocate Speaker” is displayed on the screen if an

inappropriate distance is set.

•

Default : Reset all distance settings to factory default.

Yes : Reset to the defaults.

No : Do not reset to the defaults.

•

: Moves the cursor (Up/Down/Left/Right)

: Decision the setting

: Return to previous menu

Remote control

operation buttons

Displaying the menu

Cancel the menu

Settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-590 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-590

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info