Bedienungsanleitung Denon AVR-689 (Seite 27 von 71) (Englisch)

584395

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

Speciﬁcations

[Display]

1 . S p 2 . I n 3 . O p

S p e a k e r S e t u p

8 F L : 1 2 f t

1 5 S W : 1 2 f t



k ~ A5 Distance

Set distance from listening position to speakers.

Before making the settings, measure the distance from the

listening position to the different speakers.

Distance measurement

Select the speaker you want to set, then set the distance.

Set the value closest to the measured distance.

[Variable range]

0ft ~ 60ft

: Settable in units of 1 foot.

Default setting :

• FL / FR / C / SW ·············12 ft

• SL / SR / SBL / SBR ········10 ft

NOTE

Set the distance between the listening position and the various

speakers to no more than 20 ft.

A6 ~ S1 Crossover Frequency

Select crossover frequency from which subwoofer handles low

range signal.

Only the portion of the bass sound of the various speakers output

from the subwoofer that has a frequency below the frequency set

here is output.

Set this according to the low frequency reproduction capabilities of

the speakers you are using.

[Selectable items]

40Hz

60Hz

80Hz

90Hz

100Hz

110Hz

120Hz

150Hz

200Hz

250Hz

Set the Crossover Frequency of all speakers as one.

Advanced

Set the Crossover Frequency separately for the different speakers.

q When “Cr.Over:Adv” is displayed, press ENTER or i.

w Press o p to set the crossover frequency of each speaker.

The preset speaker changes each time you press i.

[Selectable items]

40Hz

60Hz

80Hz

90Hz

100Hz

110Hz

120Hz

150Hz

200Hz

250Hz

b In the case of “LFE”, there are 8 modes: 80Hz, 90Hz, 100Hz, 110Hz,

120Hz, 150Hz, 200Hz, 250Hz.

• If in the “Advanced” settings, “Subwoofer Mode Setup” (vpage

23) in the “System Setup” is set to “Norm”, it is possible to make

this setting for speakers set to “Small” at “Speaker Conﬁguration”.

If set to “+Main”, this setting can be made regardless of the speaker

size.

• For speakers set to “Small”, sound below the crossover frequency

is cut from the sound output. The cut bass sound is output from the

subwoofer or front speakers.

• Always set the crossover frequency to “80Hz”. When using small

speakers, however, we recommend setting the crossover frequency

to a higher frequency.

S2 Test Tone

Adjust channel levels to obtain equal volume from all speakers.

Test Tone

Select test tone playback method.

[Selectable items]

Auto

: Automatically switch speaker from which test tone is

output.

Manual

: Manually switch speaker from which test tone is output.

For details on how to select, set and cancel settings for each menu, see “System setup operation” (vpage 22).

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting

ENGLISH

[Display]

1 . S p 2 . I n 3 . O p

S p e a k e r S e t u p

1 6 C r . O v e r : 8 0 H z

1 6 C r . O v e r : A d v

1 7 C r . F : 8 0 H z

F : Front, C : Center, S : Surround, SB : Surround Back, LFE : LFE are

displayed.

[Display]

1 . S p 2 . I n 3 . O p

S p e a k e r S e t u p

2 2 T . T o n e Y e s <

T . T o n e A u t o >

T e s t T o n e O n

A u t o - F L

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-689 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-689

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info