Bedienungsanleitung Denon AVR-689 (Seite 66 von 71) (Englisch)

584395

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite



Getting Started Connections Setup Playback Remote Control Multi-Zone Information

ENGLISH

Speciﬁcations

Symptom Cause Countermeasure Page

No sound is

produced from

center speaker.

• You are playing a monaural

source (TV, AM radio broadcast,

etc.) in the “STANDARD” (Dolby/

DTS Surround) mode.

• The mode is set to something

other than “STANDARD” (Dolby/

DTS Surround).

No sound

is produced

from surround

speakers.

• The surround mode is set to

“STEREO” or “DIRECT”.

• Set to a surround playback

mode.

No sound is

produced from

surround back

speaker.

• Select item other than “7.1ch” by

“Amp Assign” setting.

• Surround back speaker setting is

set to “None”.

• The “Parameter” – “Surround

Parameter” – “SB CH OUT”

settings are “OFF”.

• Surround mode not set to a mode

for 6.1- or 7.1-channel playback.

• Select “7.1ch”.

• Set to something other than

“None”.

• Please set “Parameter” –

“Surround Parameter” – “SB

CH OUT” to settings other than

“OFF”.

• Select a surround playback

mode.

31, 32

No sound is

produced from

subwoofer.

• Subwoofer’s power not turned

on.

• The “Subwoofer” setting at

“Speaker Setup” is set to “No”.

• The subwoofer is not properly

connected.

• The subwoofer’s volume is

turned off.

• Turn on the subwoofer’s power.

• Set to “Yes”.

• Check the connections.

• Adjust the subwoofer’s volume

to an appropriate level.

–

No test tones are

produced when

remote control

unit’s TEST button

is pressed.

• Surround mode not set to

“ S TA N DA R D ” ( D o l b y / D T S

Surround).

• Set to the “STANDARD”(Dolby/

DTS Surround) mode.

DTS sound is not

output.

• DVD player’s audio output setting

is not set to bitstream.

• DVD player is not compatible

with DTS sound playback.

• The AVR-689’s “Input Mode”

setting is set to other than

“DTS”.

• Set the DVD player. For details,

refer to the DVD player’s

operating instructions.

• Use a DTS-compatible player.

• Set to the “Auto” or “DTS”

mode.

–

GAudioH

Symptom Cause Countermeasure Page

Set does not work

properly when

remote control

unit operated.

• Batteries are worn.

• You are operating outside of the

speciﬁed range.

• Obstacle between main unit and

remote control unit.

• The batteries are not inserted in

the proper direction, as indicated

by the polarity marks in the

battery compartment.

• The set’s remote control sensor

is exposed to strong light (direct

sunlight, inverter type ﬂuorescent

bulb light, etc.).

• The remote ID of the main unit

and remote control unit do not

match.

• The SOURCE CONTROL switches

are not set in the correct

positions.

• Replace with new batteries.

• Operate within the speciﬁed

range.

• Remove the obstacle.

• Insert the batteries in the

proper direction, following the

polarity marks in the battery

compartment.

• Move the set to a place in which

the remote control sensor will

not be exposed to strong light.

• Set “Remote ID” for the main

unit to “1”.

• Set the SOURCE CONTROL

switches to the correct positions

according the operation you are

applying.

40, 42, 43,

47 ~ 50

GRemote Control UnitH

Troubleshooting

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-689 Seite 66

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-689

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info