Bedienungsanleitung Denon AVR-790 (Seite 25 von 72) (Englisch)

584401

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

ENGLISH

Getting Started

Connections Playback Remote Control Information Troubleshooting

SpeciﬁcationsMulti-Zone

Making the Optimum Settings for the Connected Speakers Automatically (Audyssey Auto Setup)

 Perform Step 4 repeatedly for the 3rd, 4th, 5th, and

6th measurments.

Once measurements for the sixth position are completed, “All

the measurements were ﬁnished.” is displayed.

b Measure at a total of six positions, including the main listening

position and positions around it. It is possible to stop the settings

with ﬁve positions or fewer, but for better results we recommend

measuring at six positions.

Once measurements

are nished, use ui

to select “Calculate”,

then press .

Analysis begins.

b Analysis takes several

minutes to complete.

The time required for

this analysis depends on

the number of speakers

connected. The greater

the number of speakers

connected, the longer

analysis will take.

Use ui to select the item you want to check, then

press .

The measurement result

conﬁrmation screen is

displayed.

b Subwoofers or other

speakers may be set to

a value that does not

correspond to the actual

distance.

Step 3 : Performing the Audyssey Auto Setup Procedure

• The Audyssey Auto Setup function detects the presence of each

speaker and automatically calculates the speaker size, channel

level, distance, and optimal crossover frequency setting. Audyssey

MultEQ corrects acoustical distortions within the listening area.

• Once started, MultEQ will play a series of test tones through each

speaker.

• Before starting, connect and position all of your speakers.

Step2:Measurement

MultEQ

Retry

Cancel

[ENT]:Cancel

Calculate

All the measurements

were finished.

Step3:Calculating

MultEQ

Calculating

[----------]

Please wait...

⇩

Step4:Check

MultEQ

Please check the results

of the measured item.

Distance Check

Channel Level Check

Crossover Freq.Check

Speaker Config.Check

[ENT]:Select

 Press ui to select

“Start”, then press

Detection of the speaker

conﬁguration starts.



Once all the speakers

have been detected

and the screen on

the right appears,

check the results

of detection of the

connected speakers.

Once you have checked the results, use ui to select

“Next”, then press .

Measurements for the main listening position begin.



Once the screen on

the right appears,

move the setup

microphone to the

second position, use

ui to select “Next”,

then press .

Measurements for the second position begin.

3-1.Audyssey Auto Setup

MultEQ

at ear height at

Normal

Amp Assign:

Start

Cancel

[ENT]:Select [RTN]:Back

Please place microphone

main listening position.

Retry

[ENT]:Next

Front Sp. :Yes

Center Sp. :Yes

Subwoofer :Yes

Surround Sp. :Yes

S.Back Sp. :Yes

:2sp

Step1:Speaker Detection

MultEQ

Step2:Measurement

MultEQ

Please place microphone

Cancel

[ENT]:Next

Calculate

2nd listening position.

at ear height at

See overleaf

Settings



Press .

This returns you to analysis results items, so repeat

step 7.

 Press i to select “Next”, then

press .

Press ui to select

“Store”, then press

 “Storing Please wait...” is

displayed on the on-screen

display while the results

are being stored.

When storing is complete,

“Storing complete. Auto

Setup is now ﬁnished.” is

displayed on the on-screen

display.

b If you do not want to save

the measurement results,

use ui to select “Cancel”,

then select “Yes” using

o p. All the measured

Audyssey Auto Setup data

will be erased.

NOTE

Do not turn the power off while the settings are being stored.

Disconnect the setup microphone from the AVR-

790.

Step5:Store

MultEQ

Store

Cancel

[ENT]:Store

Please select “Store”

to store measurement

values.

⇩

Step5:Store

MultEQ

Storing

Please wait...

Front

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-790 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-790

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info