Bedienungsanleitung Denon AVR-889 (Seite 75 von 80) (Englisch)

584410

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite



Getting Started Connections Setup Playback Remote Control Multi-zone Information Troubleshooting

ENGLISH

Speciﬁcations

Symptom Cause Countermeasure Page

No sound is

produced from

surround back

speaker.

• The surround back speaker’s

power ampliﬁer is assigned to a

different channel.

• Surround back speaker setting is

set to “None”.

• The “Parameter” – “Surround

Parameter” – “SB CH Out”

settings are “OFF”.

• Surround mode not set to a mode

for 6.1- or 7.1-channel playback.

• Check the setting and change it

as necessary.

• Set to something other than

“None”.

• Please set “Parameter” –

“Surround Parameter” – “SB

CH Out” to settings other than

“OFF”.

• Select a surround playback

mode.

40, 41

36 ~ 38

No sound is

produced from

subwoofer.

• Subwoofer’s power not turned

on.

• The “Subwoofer” setting at

“Speaker Conﬁguration” is set to

“No”.

• The subwoofer is not properly

connected.

• The subwoofer’s volume is

turned off.

• Turn on the subwoofer’s power.

• Set to “Yes”.

• Check the connections.

• Adjust the subwoofer’s volume

to an appropriate level.

–

No test tones are

produced when

remote control

unit’s TEST button

is pressed.

• Surround mode not set to

“STANDARD” (Dolby/DTS

Surround).

• Set to the “STANDARD” (Dolby/

DTS Surround) mode.

DTS sound is not

output.

• Blu-ray Disc player / DVD player’s

audio output setting is not set to

bitstream.

• Blu-ray Disc player / DVD player is

not compatible with DTS sound

playback.

• The AVR-889’s “Decode Mode”

setting is set to “PCM”.

• Set the Blu-ray Disc player / DVD

player. For details, refer to the

Blu-ray Disc player / DVD player’s

operating instructions.

• Use a DTS-compatible player.

• Set to the “Auto” or “DTS”

mode.

–

HDMI audio

signals are not

output from

speakers.

• The “Manual Setup” – “HDMI

Setup” – “HDMI Audio Out”

setting is set to “TV”.

• Set to “AMP”. 26

No sound is

output from

the monitor

connected

with HDMI

connections.

• The “Manual Setup” – “HDMI

Setup” – “HDMI Audio Out”

setting is set to “AMP”.

• Set to “TV”. 26

Dolby TrueHD,

DTS-HD, Dolby

Digital Plus audio

is not output.

• HDMI is not connected.

• Blu-ray Disc player audio output

setting is not set to bitstream.

• Blu-ray Disc player is not

compatible with DTS sound

playback.

• Connect the HDMI.

• Set the Blu-ray Disc player.

For details, refer to the Blu-ray

Disc player player’s operating

instructions.

• Use a DTS-compatible player.

10, 11

–

Troubleshooting

Symptom Cause Countermeasure Page

No picture

appears.

• The connections between the

AVR-889 and monitor are faulty.

• The monitor’s input setting is

wrong.

• PURE DIRECT mode is set.

• The player is connected using the

component input connectors, the

monitor is connected using the

video (yellow) or S-Video output

connectors.

• Check the connections.

• Set properly.

• Cancel the PURE DIRECT mode.

• High deﬁnition (1080i/720p) and

progressive (480p/576p) video

signals are not down-converted.

Set the player to interlace

(480i/576i) signals.

10 ~ 13

–

Picture cannot be

recorded.

• Input source does not match

recorder’s video connection

connector (video or S-Video).

• The video conversion function

does not work for the REC

OUT connectors. Match the

input source and recorder

connections.

DVDs cannot be

copied on a VCR. –

• This is not a malfunction. Most

movie software includes copy

prevention signals and cannot be

copied.

–

On-screen display

is not shown.

• The operation content display is

“OFF”.

• The main volume display is

“OFF”.

• The display during tuner operation

is “OFF”.

• The display during iPod operation

is “OFF”.

• When viewing HDMI or

component video signals via the

AVR-889, the on-screen display

appears when the MENU button

on the main unit or the A. MENU

button on the remote control

unit.

• When only HDMI or component

video signals are input to the

AVR-889, the characters of

the on-screen display are not

displayed over the picture.

• Set “Manual Setup” – “Option

Setup” – “On-Screen Display”

– “Text” to “ON”.

• Set “Manual Setup” – “Option

Setup” – “On-Screen Display”

– “Master Volume” to “ON”.

• Set when “Manual Setup”

– “On-Screen Display” – “Tuner

Information”is not “OFF”.

• Set when “Manual Setup”

– “On-Screen Display” – “ iPod

Information” is not “OFF”.

GVideoH

Symptom Cause Countermeasure Page

HDMI audio

signals are not

output from

speakers.

• The “Manual Setup” – “HDMI

Setup” – “Audio” setting is set

to“TV”.

• Set to “Amp”. 26

GHDMIH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-889 Seite 75

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-889

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info