Bedienungsanleitung Denon AVR-990 (Seite 61 von 108) (Englisch)

584418

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite



Getting Started Connections Settings Remote ControlZONE2 Information Troubleshooting Speciﬁcations

ENGLISH

Playing Network Audio, USB Memory Devices

Listening to Internet Radio

Playback preparation.

q Check the network environment, then turn on the AVR-

990’s power (vpage 22 “Connecting to a Home Network

(LAN)”).

w If settings are required, make the “Network Connecting”

(vpage 37).

e Set [DEVICE SELECT 1] to “MAIN/TV” [DEVICE SELECT 2]

to “MAIN”.

Press [SOURCE SELECT] to display the GUI Source

Select menu, then select “ ” (vpage 26).

Press ui to select the item you want to play, then

press ENTER or p.

The station list is displayed.

Press ui to select the station, then press ENTER,

p or [1].

Playback starts once buffering reaches “100%”.

Adjust the items below.

Adjusting the master volume (vpage 65)

Selecting the surround mode (vpage 67)

Adjusting the Sound and Picture Quality

(vpage 69)

uio p

ENTER

[DEVICE

SELECT 1]

[DEVICE

SELECT 2]

[SOURCE

SELECT]

[NET/USB]

[1]

uiop

ENTER

Button located on both the main unit

and the remote control unit

BUTTON

Button only on the main unit

Button only on the remote control unit

[BUTTON]

Symbols used to indicate buttons in this manual

To stop (vpage 65)

Searching pages (vpage 66)

Searching by ﬁrst letter (vpage 66)

There are many Internet radio stations on the Internet, and the

quality of the programs they broadcast as well as the bit rate of the

tracks varies widely.

Generally, the higher the bit rate, the higher the sound quality, but

depending on the communication lines and server trafﬁc, the music

or audio signals being streamed may be interrupted. Inversely, lower

bit rates mean a lower sound quality but less tendency for the sound

to be interrupted.

“Server Full” or “Connection Down” is displayed if the station is

busy or not broadcasting.

On the AVR-990, folder and ﬁle names can be displayed as

titles. Any characters that cannot be displayed are replaced with

“. (period)”.

Use the RESTORER mode to expand the low and high frequency

components of compressed audio ﬁles and achieve a richer sound

“RESTORER” (vpage 73). The default setting is “Mode 3”.

When <STATUS> is pressed, the display can be switched between

the title name and radio station name.

The time (default : 30 sec) for which the GUI menu are displayed

can be set at GUI menu “GUI” – “NET/USB” (vpage 41). Press

uio p to return to the original screen.

•

Recently Played Internet Radio Stations

Recently played internet radio stations can be selected from “Recently

Played”.

Up to 20 stations stored in “Recently Played”.

Press ui to select “Recently Played”, then press

ENTER or p.

Press ui to select the item you want to play, then

press ENTER, p or [1].

[NET/USB]

Front Rear

Playback

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-990 Seite 61

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-990

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info