Bedienungsanleitung Denon AVR-991 (Seite 82 von 116) (Englisch)

584419

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

ENGLISH

Basic versionSimple version InformationAdvanced version

Remote control operation

buttons

Move the cursor

(Up/Down/Left/Right)

Conﬁrm the setting Return to previous menu

Manual Setup

Setting items Setting details

Distance

(Continued)

• The speakers that can be selected differ depending on the “Amp Assign”

(vpage77) and “Speaker Conﬁg.” (vpage77) settings.

• Default settings :

Front L / Front R / Center / Subwoofer / F.Height L / F.Height R / F.Wide L /

F.Wide R : 12.0 ft (3.6 m)

Surround L / Surround R / S.Back L / S.Back R : 10.0 ft (3.0 m)

• Set the difference in the distance between the speakers to less than 20

ft (6.0 m).

NOTE

Speakers set to “None” in “Speaker Conﬁg.” (vpage77) are not displayed.

Default : The “Distance” settings are returned to the default settings.

• Yes : Reset to the defaults.

• No : Do not reset to the defaults.

When you select “Default” and press ENTER, the “Default Setting?”

prompt is displayed. Select either “Yes” or “No”, and press ENTER.

Channel Level

Set the volume of the test

tone to be the same when it

is output from each speaker.

Test Tone Start : Output test tone.

• Front L / F.Height L / Center / F.Height R / Front R / F.Wide R /

Surround R / S.Back R

/ S.Back L

/ Surround L / F.Wide L /

Subwoofer : Select the speaker.

z When the “Speaker Conﬁg.” – “S.Back” setting (vpage78) is set to

“1spkr”, “S.Back” is displayed.

• –12.0dB – +12.0dB (0.0dB) : Adjust the volume.

• When o is pressed while the subwoofer volume is set to “–12 dB”, the

“Subwoofer” setting switches to “OFF”.

• When “Channel Level” is adjusted, the adjusted values are set for all the

surround modes. To adjust the channel level separately for the different

surround modes, use the operation see page 53.

NOTE

• Speakers set to “None” in the “Speaker Conﬁg.” (vpage77) settings

are not displayed.

• When a headphones jack is inserted in the PHONES jack of this unit, the

“Channel Level” is not displayed.

Default : The “Channel Level” settings are returned to the default settings.

• Yes : Reset to the defaults.

• No : Do not reset to the defaults.

When you select “Default” and press ENTER, the “Default Setting?”

prompt is displayed. Select either “Yes” or “No”, and press ENTER.

Setting items Setting details

Crossover Frequency

Set the maximum frequency

of the bass signal output

from each channel to

the subwoofer. Set the

Crossover Frequency to

suit the bass reproduction

capability of the speaker

being used.

Crossover : Set the crossover frequency.

• 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz /

250Hz

Advanced : Specify crossover frequency for each speaker.

• Front / Center / Surround / S.Back / F.Height / F.Wide : Select the

speaker.

• 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz /

250Hz : Set the crossover frequency.

• “Crossover Frequency” can be set when the “Bass Setting” –

“Subwoofer Mode” (vpage78) setting is “LFE+Main”, or when you

have a speaker that is set to “Small”.

• Always set the crossover frequency to “80Hz”. When using small

speakers, however, we recommend setting the crossover frequency to

a higher frequency.

• For speakers set to “Small”, sound below the crossover frequency

is cut from the sound output. The cut bass sound is output from the

subwoofer or front speakers.

• The speakers that can be set when “Advanced” is selected differ

depending on to the “Subwoofer Mode” setting (vpage78).

• When “LFE” is selected, speakers set to “Small” at “Speaker Conﬁg.”

can be set. If the speakers are set to “Large”, “Full Band” is displayed

and the setting cannot be made.

• If set to “LFE+Main”, this setting can be made regardless of the

speaker size.

Front Speaker Setup

Set the front speakers to

use for every surround

mode.

NOTE

This can be set when “Amp

Assign” is set to “Front B”

(vpage77).

2CH DIRECT/STEREO : The front speakers used in the direct, stereo and

pure direct play modes (2 channel) are set in advance.

• A : Front speaker A is used.

• B : Front speaker B is used.

• A+B : Both front speakers A and B are used.

MULTI CH : The front speakers used in modes other than the direct,

stereo and pure direct play modes (2 channel) are set in advance.

• A : Front speaker A is used.

• B : Front speaker B is used.

• A+B : Both front speakers A and B are used.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-991 Seite 82

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-991

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info