Bedienungsanleitung Denon AVR-991 (Seite 111 von 116) (Englisch)

584419

111

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

108

ENGLISH

GRadioH

Symptom Cause/Solution Page

Reception fails, or

there is a lot of noise

or distortion.

• Change the antenna orientation or position.

• Separate the AM loop antenna from the unit.

• Use an FM outdoor antenna.

• Separate the antenna from other connection cables.

20, 21

GControl dock for iPodH

Symptom Cause/Solution Page

iPod cannot be

played.

• Check the iPod connections.

• Plug the control dock for iPod’s AC adapter into a power outlet.

• Switch the input source to “DOCK”.

–

GInternet radio / Media server / iPod / USB memory device / Flickr / Napster / Pandora / RhapsodyH

Symptom Cause/Solution Page

When a USB

memory device is

connected, “USB” is

not displayed on the

menu.

• The set cannot recognize a USB memory device. Check the

connection.

• A USB memory device not conforming to mass storage class or

MTP standards is connected. Connect a USB memory device

conforming to mass storage class or MTP standards.

• A USB memory device that the set cannot recognize is connected.

This is not a malfunction. DENON does not guarantee that all USB

memory devices will operate or receive power.

• USB memory device is connected via USB hub. Connect the USB

memory device directly to the USB port.

–

Files on a USB

memory device

cannot be played.

• USB memory device is in format other than FAT16 or FAT32.

Set the format to FAT16 or FAT32. For details, refer to the USB

memory device’s operating instructions.

• USB memory device is divided into multiple partitions. When

divided into multiple partitions, only ﬁles stored in the top partition

can be played.

• Files are stored in a non-compatible format. Record the ﬁles in a

compatible format.

• You are attempting to play a ﬁle that is copyright protected. Files

that are copyright protected cannot be played on this set.

–

The ﬁle names

are not displayed

properly (“...”, etc.).

• Characters that cannot be displayed are used. This is not a

malfunction. On this set, characters that cannot be displayed are

replaced with a “.” (period).

–

Symptom Cause/Solution Page

Internet radio cannot

be played.

• Ethernet cable is not properly connected or network is

disconnected. Check the connection status.

• Program is being broadcast in non-compatible format. Only

Internet radio programs in MP3 and WMA can be played on this

set.

• The computer’s or router’s ﬁrewall is activated. Check the

computer’s or router’s ﬁrewall settings.

• Radio station is not currently broadcasting. Choose a radio station

that is currently broadcasting.

• IP address is wrong. Check the set’s IP address.

–

Files stored on a

computer cannot be

played.

• Files are stored in a non-compatible format. Record in a compatible

format.

• You are attempting to play a ﬁle that is copyright protected. Files

that are copyright protected cannot be played on this set.

• Set and computer are connected by USB cable. The set’s USB

port cannot be used for connection to a computer.

–

Server is not found,

or it is not possible

to connect to the

server.

• The computer’s or router’s ﬁrewall is activated. Check the

computer’s or router’s ﬁrewall settings.

• Computer’s power is not turned on. Turn on the power.

• Server is not running. Launch the server.

• Set’s IP address is wrong. Check the set’s IP address.

–

iPod cannot be

played.

• Some iPods do not support being used connected directly to the

USB port.

Cannot connect to

preset or favorite

radio stations.

• Radio station is not currently broadcasting. Wait a while before

trying again.

• Radio station is not currently in service. It is not possible to

connect to radio stations that are no longer in service.

–

For some radio

stations, “Server

Full” or “Connection

Down” is displayed

and station cannot be

connected to.

• Station is congested or not currently broadcasting. Wait a while

before trying again.

–

Sound is broken

during playback.

• Network’s signal transfer speed is slow or communications lines

or radio station is congested. This is not a malfunction. When

playing broadcast data with a high bit rate, the sound may be

broken, depending on the communications conditions.

–

Sound quality is poor

or played sound is

noisy.

• File being played has a low bit rate. This is not a malfunction. –

Cannot login

to Rhapsody.

(“Incorrect

Username or

Password” is

displayed.)

• Login information is incorrect. Check if the Username for Rhapsody

has been properly entered. Re-enter the Password. (Password is

not displayed.)

www.rhapsody.com/denon

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-991 Seite 111

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-991

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info