Bedienungsanleitung Denon D-107 (Seite 13 von 80) (Englisch)

584602

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

ENGLISH

Press the MENU button.

TONE/SDB

ENTERDISPLAY MENU

SLEEPFOLDERTITLETIME

STOP

/BAND

PLAY/PAUSE

VOLUME

FUNCTIONMUTE

PRESET

2, 4

DisplayMode

Press the ENTER button.

ENTER

Normal?

Press the +/− buttons to

select the display

brightness.

Each time you press this

buttons, the display

changes as follows:

PRESET

Display brightness setting

Press the ENTER button.

• The setting is entered.

ENTER

Press the MENU button.

TONE/SDB

ENTERDISPLAY MENU

SLEEPFOLDERTITLETIME

STOP

/BAND

PLAY/PAUSE

VOLUME

FUNCTIONMUTE

PRESET

3, 5

2, 4

DisplayMode

Press the +/− buttons to

select “ECO Mode”.

PRESET

Eco-mode setting

Press the ENTER button.

ENTER

ECO Mode

ECO On/Off?

Press the +/− buttons to

make “On” or “Off”

flash.

The selected setting (“On”

or “Off”) switches each time

the +/− buttons is pressed.

The setting that is flashing is

the one that is selected.

PRESET

Press the ENTER button.

• The “MENU” indicator turns off

and the setting is completed.

ENTER

2 Be sure to set the current time beforehand.

MENU FUNCTION

2 Be sure to set the current time beforehand.

2 Various functions can be operated and various settings made using the menu function.

Press the + or − button after pressing the MENU button to perform the settings listed below.

Setting item

DisplayMode

[Display brightness

setting]

Setting details

Set the display’s brightness.

Select “Normal”, “Dimmer-1” or “Dimmer-2”.

Page

TimerSet?

[Timer time setting]

Use this to make the everyday timer

and once timer settings.

Timer Mode

[Timer mode setting]

17, 18

TimerOn/Off

[Timer ON/OFF setting]

Use this to turn the everyday timer and

once timer to “ON” or “OFF”.

TimerCheck?

[Timer setting check]

Use this to check the everyday timer and

once timer settings.

ClockAdjust

[Time setting]

Use this to set the current time. 14

TunerPreset

[Presettings]

Use this to store the reception band

and frequency at the number buttons.

Tuner Mode

[Tuner mode setting]

StationName

[Station name setting]

Use these to give names to

automatically set stations.

Eco Mode

[Eco-mode setting]

Use this for a lower power consumption in the standby mode.

Set to “On” or “Off”.

AutoOffMode

[Auto off mode setting]

This function can be used to automatically set the power to the

standby mode if the set remains in the stop mode for the set amount

of time with the function set to “CD”.

Set to “On” or “Off” and select the time (5, 10, 20 or 30 minutes).

2 The MENU button functions in both the

stop and play modes.

(RC-909)

Press the MENU button to cancel the

menu function currently being set.

2 To set the menu functions back to the default

values, press the FUNCTION and

1/3 buttons on

the main unit simultaneously, then within 3

seconds press the

2/BAND button.

“RAM CLEAR” is displayed for approximately 2

seconds and the values are reset to their defaults.

2 / BAND

(Main unit)

FUNCTION

(Main unit) (Main unit)

(RC-909)

Within

3 seconds

Normal? Dimmer-1? Dimmer-2?

NOTE:

The display and indicators remain off while the

standby mode is set in the eco-mode.

To turn on the power, press the ON/STANDBY

button on the CD receiver or the POWER button

on the remote control unit. (The auto power on

function does not work.)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon D-107 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info