Bedienungsanleitung Denon DBP-2010CI (Seite 41 von 52) (Englisch)

584580

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Function Setup Function Setup

ENGLISH

Introduction Connections Playback Function Setup Others

After you made IP address/DNS settings or when a LAN cable is connected, always perform the

connection test to check if the connection is correctly made.

1) Press [SETUP] in stop mode.

2) Use [Y/Z] to select , then press [ENTER].

3) Use [Y/Z] to select , then press [ENTER].

4) Use [U/V] to select “Network Connection”, then press [ENTER].

5) Use [U/V] to select “Connection Test”, then press [ENTER].

Connection test will start automatically and the test result will appear right after the connection test

finishes.

• “Testing...” : The test is in progress.

• “Pass” : Connection test is successfully completed.

• “Fail” : Connection test failed. Check the connection settings.

Press [ENTER] to go to the list of network status confirmation screen.

6) Press [ENTER] to go back to the previous screen or press [SETUP] to exit.

Network settings are set to the following settings initially. (In most cases, you can connect to the

Internet without making any changes to the default settings.)

If you want to set the network settings back to the default settings as above (except “BD-Live

Setting”), follow the procedure below.

1) Follow steps 1) to 4) in “Connection Test” on this page.

2) Use [U/V] to select “Enable(Easy)”, then press [ENTER].

• The unit will start the connection test automatically and the test result will appear right after the

test finishes.

• After the connection test finishes, press [ENTER] to go to network status confirmation screen.

3) Press [ENTER] to activate the network settings and set the network connection

automatically. Press [SETUP] to exit.

If you need to set specific settings manually in accordance with your network environment, select

“Enable(Custom)” to set each setting as necessary.

䡵IP Address Setting

1) Follow steps 1) to 4) in “Connection Test” on this page.

2) Use [U/V] to select “Enable(Custom)”, then press [ENTER].

3) Use [U/V] to select “IP Address Setting”.

4) Press [ENTER] repeatedly to select the desired setting.

“Auto(DHCP)” : If your router has DHCP server function, select “Auto(DHCP)”.

“Manual” : If your router does not have DHCP server function, select “Manual”.

If you select “Manual”, follow the following instruction to set the IP address.

Use [U/V] to select “IP Address”, then press [ENTER].

• IP address setting screen will appear. Enter IP address, subnet mask and default gateway with

[U/V/Y/Z] and [the Number buttons].

• Enter the IP address number after checking the specifications of your router.

• If the IP address number is unknown, check the IP address number of other devices.

(e.g. PC connected via LAN cable) and assign a different number from those of other devices.

After you enter all correctly, press [ENTER].

• Confirmation message will appear.

Network Connection

Connection Test

Note

• If the connection test passes, you can enjoy the BD-Live functions using the Internet without

making any extra settings.

• If the connection test fails, you may need to change the MAC address settings of your router.

You can check the MAC address of this unit at the bottom of the “Enable(Custom)” screen.

Enable(Easy)

- IP Address Setting Auto(DHCP)

- DNS Setting Auto(DHCP)

- Proxy Setting Do Not Use

- Connection Speed Auto

- BD-Live Setting Allow

IP Address

Subnet Mask

Default Gateway

Primary DNS

Secondary DNS

then press ‘ENTER’.

Connection Test

∗∗∗ . ∗∗∗ . ∗∗∗ . ∗∗∗

Note

• The setting of “BD-Live Setting” will not be set back to the default, even if you follow the

procedure.

Enable(Custom)

IP Address Setting

IP Address

Subnet Mask

Default Gateway

then press ‘ENTER’.

∗∗∗ ∗∗∗ ∗∗∗∗∗∗

∗∗∗∗∗∗ ∗∗∗∗∗∗

Remote control operation

buttons

:Displaying the menu

Cancel the menu

:Move the cursor

(Up/Down/Left/Right) : Confirm the setting : Return to previous menu

E5KA0UD_EN.book Page 38 Tuesday, April 28, 2009 11:15 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon DBP-2010CI Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info