Bedienungsanleitung Denon DBP-2012UD (Seite 34 von 74) (Englisch)

451156

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

ENGLISH

Internet

To WAN side

Modem

To LAN port

LAN port/

Ethernet

connector

Computer

Router

n System requirements

Internet connection via broadband.

Modem

A device that connects to the broadband and conducts communications on the Internet.

Some modems also incorporate a router.

Router

When using the unit, we recommend a router with the following features.

• Built-in DHCP (Dynamic Host Conﬁguration Protocol) server.

This function automatically assigns an IP address on the LAN.

• Built-in 100BASE-TX switch (built-in switching hub compatible with speeds upwards of 100 Mbps)

Computer (recommended system)

• OS

Windows

XP Service Pack2 or more or Windows Vista

• Software

Server software supporting Windows Media Player ver.11 or DLNA.

Ethernet cable (CAT-5 or greater recommended)

• An ethernet cable is not included with the unit.

• Use only shielded STP or ScTP LAN cable which is available at retailer.

• We recommend a shielded straight cable (normal type) for Ethernet connections.

If you use the ﬂat type or a non-shielded cable, the noise may adversely affect other devices.

n Checking the network connection

After connection, test the Internet connection with “Connection Test” in “Network” on the GUI menu

(vpage38).

• If “Network is FAILED.” is displayed in the test, check the IP address with “Network” in “Information”

on the GUI menu, then set “DHCP” to “Manual” (vpage38).

• The unit can use the DHCP function to automatically set up the network.

• When setting up your network manually, after subscribing to an ISP, make the settings according to

directions in “Network” on the GUI menu (vpage38).

• If you connect the unit to a network without a DHCP function, conduct IP address and other settings

according to “Network” on the GUI menu (vpage38).

• The unit does not support PPPoE. If you subscribe to a service that is set with PPPoE, a PPPoE

compatible router is required.

• When setting up the network manually, consult with your network administrator for the settings to

make.

n Registering the connected device for the network

For playing ﬁles stored on a device connected via a network, the device must have the unit registered

in advance.

• For registering, refer to the operation manual supplied with the server.

For Internet connections, use an ISP (Internet Service Provider). Ask your local dealer for details.

NOTE

• Do not connect an ETHERNET connector directly to the LAN port/Ethernet connector on your

computer.

• It is necessary to subscribe to an ISP in order to connect to the Internet. If you already have a

broadband connection, there is no need to subscribe anew.

• The router you can use varies with the ISP. For more information, contact your ISP or PC dealer.

• DENON assumes no responsibility whatsoever for any communication errors or problems resulting

from customer's network environment or connected devices.

Connecting to a network

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon DBP-2012UD Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon DBP-2012UD

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info