Bedienungsanleitung Denon DBP-2012UD (Seite 60 von 74) (Englisch)

451156

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

ENGLISH

If a problem occurs, ﬁrstly check the following:

1. Are the connections correct?

2. Is the set being operated as described in the owner’s manual?

3. Are other components operating properly?

If this unit does not operate properly, check the items listed in the table below. If the problem continues

there may be a malfunction.

In this case, disconnect the power immediately and contact your retail outlet.

GGeneralH

Symptom Cause/Solution Page

Power does not turn

on.

• Check if the power cord is properly connected.

• Plug the power supply cord into the power outlet.

• The safety protection device may be activated. Unplug the power

cord once, and wait for 5-10 seconds and then plug it in again.

Playback does not

start even when 1 is

pressed, or starts but

stops immediately.

• Is there condensation inside the player or on the disc? (Let it sit for

1 to 2 hours with the power off.)

• When the disc is scratched or contaminated with ﬁngerprints, the

disc may not play correctly. Clean the disc or replace with a non-

scratched disc.

• Is the disc loaded upside-down? Load the disc properly, with the

side to be played face down.

• Is an unplayable disc loaded?

• No disc is inserted. Insert a disc.

No return to start-up

screen when a disc

is removed.

• There may be an internal error. Set the power to standby, wait

awhile, then turn the power back on.

Buttons do not work

or the unit stops

responding.

• Operations may not be permitted by the disc.

• The safety protection device may be activated. Unplug the power

cord once, and wait for 5-10 seconds and then plug it in again.

• Refer to the instructions of the disc.

–

The camera angle

does not switch.

• If the multiple angles are not recorded in a BD-Video or DVD-

Video, the camera angle cannot be switched. Also, multiple angles

may only be recorded for speciﬁc scenes.

Playback does not

start when a title is

selected.

• Playback may be prohibited by the viewing restriction setting.

Check the “Ratings” setting on the GUI menu.

I have forgotten the

password for the

rating level.

• On the GUI menu, perform the “System” – “Initialize” procedure. 37

Troubleshooting

GVideoH

Symptom Cause/Solution Page

No picture appears. • Switch the TV’s input setting to the external input connected to

the player.

• Is the Pure Direct function set to “Pure Direct 1” or “Pure Direct

2”? Set it to “Off”.

• Check the connection of the video/component video cable.

• Is it set to “24p Output On” by pressing

HDMI MODE on the

remote control? If so, no video signals are output from the video

and component video terminals during playback of certain discs.

• Does the setting of resolution on the match the connected device’s

resolution?

• Is the resolution is set according to the connected device by

pressing RESOLUTION on the remote control? Make settings for

resolution.

• The video cable is not connected securely. Connect the video cable

securely.

• The HDMI OUT connector is probably connected to a DVI IN

connector of equipment. DVI connection does not support HDCP

and the video is not output correctly.

11, 12

11 – 13

13, 53

The picture is not

displayed or is

disrupted.

The picture of a BD-

Video or DVD-Video

disc is in black and

white.

• The picture may be slightly disturbed right after fast-forwarding or

reversing. This is not a malfunction.

• Connect the unit’s video/component video output either directly to

the TV or to the TV via the AV receiver. Do not connect via a VCR,

(video cassette recorder). Some discs include copy prohibit signals,

and when such discs are played via a VCR the copy guard system

may disrupt the picture.

• Is a disc that is not compatible with the player or a disc with a

different region number loaded? (This player supports region code

“B” for BD-Video discs, “2” or “ALL” for DVD-Video discs.)

The picture freezes

momentarily during

playback.

• If a disc is scratched or contaminated with ﬁngerprints, the disc

may not play correctly. Clean the disc or replace with a non-

scratched disc.

• There may be a problem with the data recorded on the disc.

Subtitles are not

displayed.

• Subtitles cannot be displayed for BD-Video, DVD-Video or DivX

ﬁles that do not contain subtitles.

• Is the subtitle setting “Off”? Use the disc menu or

SUBTITLE to

set the subtitles to display.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon DBP-2012UD Seite 60

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon DBP-2012UD

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info