Bedienungsanleitung Denon DBP-2012UD (Seite 28 von 74) (Holländisch, Französisch, Italienisch, Spanisch, Schwedisch)

451156

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

ENGLISH

Changing the brightness of the display

( Dimmer control)

The brightness of the display can be changed.

Press DIMMER.

• The brightness changes each time the

button is pressed.

Normal DarkDim Off

Playing high-quality audio

( Pure direct function)

This enables you to play high quality audio by stopping the video

signal, etc., output, and outputting the analog audio signal only.

Press

PURE DIRECT

while stopped.

• The Pure Direct mode changes each time

the button is pressed.

Pure Direct1 Pure Direct2 Off

Pure Direct 1

This turns off the digital audio output, video output,

and display.

Pure Direct 2

This turns off the digital audio output and video

output.

Off

This turns off the pure direct function.

• You cannot use PURE DIRECT while the GUI menu is displayed.

• The pure direct setting returns to “Off” when the unit is put in

standby mode.

Basic settings

This section describes the setting operations for basic settings

available with the remote control.

The icons show the category of content applicable to each operation.

Video : Blu-ray Disc, DVD-Video, DivX plus HD,

MPEG, AVI, WMV, AVCHD

Audio : Super Audio CD, CD, DVD-Audio, MP3,

WMA, AAC, LPCM

Photo : JPEG

Basic connections (vpage10)

Playback (Basic operation) (vpage16)

n Changing the brightness of the display

(Dimmer control) (vpage24)

n Playing high-quality audio

(Pure direct function) (vpage24)

n HDMI control functions (vpage24)

n Video resolution (vpage25)

n Adjusting the picture quality (Picture control)

(vpage26)

n Mode setting (vpage27)

HDMI control functions

When you make HDMI connections with a TV or AV receiver

compatible with this unit and HDMI control functions, you can perform

the following operations by setting up the HDMI control functions of

each device.

• TV or AV receiver power is turned on by operating the unit and

functions change with this unit input.

• Turning off the TV’s power turns the unit’s power to standby.

• Operating the unit via the TV’s remote control.

(When the TV’s remote control has player operation buttons)

Set the HDMI control function to “On”.

GUI menu “System” – “HDMI Control” (vpage37).

Turn on all the equipment connected by HDMI cable.

Set the HDMI control function for all equipment

connected by HDMI cable.

• Please refer to the owner’s manuals of connected devices for how

to make settings.

• Carry out steps 2 and 3 if any of the equipment was unplugged.

To ensure that the unit’s HDMI video output is

projected on the TV screen, change the input function

of the TV and AV receiver.

When you turn the TV’s power to standby, check

that the power of the unit and AV receiver also goes

on standby.

If the HDMI control function does not operate properly, check the

following points.

• Is the TV or AV receiver compatible with the HDMI control function?

• Are the HDMI control function settings of all equipment correct?

(Step 3)

• After setting, did you add another HDMI device connection or make

any changes in the connections? If so make the settings again.

NOTE

• Some functions may not operate depending on the connected TV

or AV receiver. Check the owner’s manual of each device for details

beforehand.

• When “HDMI Power Off Control” (vpage37) is set to “Off”, the

unit does not go to standby even if the connected device is in the

standby mode.

The icons show the category of

content applicable to each operation.

Video Audio Photo

For details of the media corresponding to each icon, see “Playable media”

(vpage48).

1.DBP2012E2_ENG_10A.indd 24 2011/07/22 17:25:13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon DBP-2012UD Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon DBP-2012UD

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info