Bedienungsanleitung Denon DBP-2012UD (Seite 41 von 74) (Holländisch, Französisch, Italienisch, Spanisch, Schwedisch)

451156

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

ENGLISH

Basic versionSimple version InformationAdvanced version

General Setting

Settings for system, language, parental lock, network, etc. can be made.

System

Default settings are underlined.

Set the following settings.

• Screen saver settings

• Power saving mode settings

• HDMI control function settings

• Initialize settings

• Firmware update from the Internet

• BD-LIVE Memory switching settings

Setting items Setting details

Screen Saver

Sets the screensaver.

On : The screensaver function activates when stop or pause status

continues for about three minutes.

Off : Does not use the screensaver.

Auto Power Mode

This setting automatically

sets the power to standby.

On : This setting automatically sets the power to standby if any of the

following states continues for approximately 30 minutes.

• Disc not loaded

• Playback stopped

• Stopped due to the resume function

Off : Does not use the auto power mode.

Power Saving

Sets to power saving mode

during standby.

Power Saving Standby : This is the lowest power consumption mode.

During standby, operations are not accepted via HDMI control and RS-232C.

Power indicator status in standby mode : Off

Normal Standby : During standby, operations are accepted via HDMI

control and RS-232C. Power consumption is slightly higher at this time.

Power indicator status in standby mode : Red

HDMI Control

Links the unit and a device

connected with an HDMI

cable that supports HDMI

control.

On : Links with the device connected to HDMI.

Off : Disables the HDMI control function.

• For the HDMI control function to operate, it is necessary for the unit or

HDMI-compatible TV connected to the unit to have an HDMI connection.

• Refer to “HDMI control functions” (vpage24) for more information on

HDMI control functions.

• After the “HDMI Control” setting has been changed, always turn off the

power to the connected equipment and then turn it back on.

HDMI Power Off Control

Links the power of the unit

and a device connected with

an HDMI cable that supports

HDMI control.

On : Turns the unit’s power to standby through linkage to the TV.

Off : Does not turn the unit’s power to standby through linkage to the TV.

Setting items Setting details

Initialize

All settings including audio

mode and picture quality are

set to default settings.

Cancel : Does not initialize.

OK : Executes initialization.

Firmware Update

Updates the ﬁ rmware of the

unit via the Internet.

Check for Update : Checks if a newer version of ﬁ rmware exists. Press

ENTER to see the approximate amount of time required for the update.

If the ﬁ rmware is already updated to the latest version, the ﬁ rmware

updating operation starts after you press ENTER.

When the update starts, a progress bar and the remaining time required to

complete the update are displayed on the television screen.

When the update completes, the units turns on again and returns to the

normal state.

Update Notiﬁ cation

Displays the message for

updating on a television

screen just after the power

is turned on.

On : The message for updating is displayed on a television screen.

Off : The message for updating is not displayed on a television screen.

BD Data Utility

Initializes the BD data stored

in the built-in memory or

external memory used for

BD-Live.

BD Data Information : The BD data used for BD-Live are initialized.

The space remaining in the memory being used is displayed.

FMT BD Data : Initializes the space for BD data being used for BD-Live.

This operation deletes all data. When a USB memory device that

stores the data is inserted, never execute this operation.

BD-Live Memory : Built-in memory or external memory is selected for

the BD-Live memory.

• Internal : The built-in memory is used.

• External : The USB memory device inserted in the unit is used.

If the ﬁ le size used for BD-Live will exceed the remaining built-in

memory capacity, select “External” (vpage18).

NOTE

When the following message is displayed after “Firmware Update” (vpage37), follow the instructions in

the message to perform operations.

“Disconnect the power plug of the unit from the outlet, wait approximately 30 seconds, and then

insert the plug again before use.”

Remote control operation

buttons

Displaying the menu

Cancel the menu

Move the cursor

(Up/Down/Left/Right)

Decision the setting Return to previous menu

1.DBP2012E2_ENG_10A.indd 37 2011/07/22 17:25:20

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon DBP-2012UD Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon DBP-2012UD

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info