Bedienungsanleitung Denon DBP-A100 (Seite 6 von 71) (Englisch)

498725

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

ENGLISH

TroubleshootingInformationHDMI Control FunctionPlaybackSetupConnections Specications

• Before turning the power switch on

Check once again that all connections are correct and that there are

no problems with the connection cables.

• Power is supplied to some of the circuitry even when the unit is set

to the standby mode. When leaving home for long periods of time,

be sure to unplug the power cord from the power outlet.

• Image persistence (image burn-in)

Do not leave still images of the disc menu, DBP-A100 menu, etc.,

displayed on the TV screen for long periods. This can result in image

persistence (image burn-in) on the screen.

• About Condensation

If the DBP-A100 unit is moved from a cold place to a warm place, or

installed in a room subject to rapid temperature rise from a heater,

etc., condensation may form on parts inside the unit (operating

parts and lenses).

If used under this condition, the DBP-A100 will not operate correctly

and damage may result. If condensation forms on the unit, leave the

DBP-A100 off for 1 to 2 hours before using it again.

• Cautions on using mobile phones

Using a mobile phone near this unit may result in noise. If that

occurs, move the mobile phone away from the unit when it is in

use.

• Moving the unit

Be sure to remove a disc, turn off the power and unplug the power

cord from the power outlet. Next, disconnect the connection cables

to other system equipment before moving the unit.

• About Care

• Wipe the cabinet and control panel clean with a soft cloth.

• Follow the instructions when using a chemical cleaner.

• Benzene, paint thinner or other organic solvents, as well as

insecticide, may cause material changes and discoloration if brought

into contact with the unit, and should, therefore, not be used.

• Proper Ventilation

If the unit is left in a room full of the smoke from cigarettes, etc., for

long periods of time, the surface of the optical pickup may get dirty,

preventing it from receiving signals inproperly.

• Note that for explanatory purposes the illustrations in these

instructions may differ from the actual unit.

Cautions on Handling About Media

Playable Media

Playable

formats/

modes

Playable

region codes

Symbols

Used

in this

Owner’s

Manual

BD-Video

z1,z2

–

Discs with

DVD-Audio

–

DVD-A

DVD-Video

z1,z2

Include region

ALL

DVD-V

DVD-R,

DVD+R

Video

mode,

AVCHD

format

–

DVD

DVD-RW,

DVD+RW

Super Audio

– –

SA-CD

– –

CD-R

CD-RW

Discs

z1 :

BD-Video/DVD-Audio/DVD-Video discs may not operate as

described in this manual due to menu structure.

z2 :

BD players and BD-Video discs, and DVD players and DVD-

Video discs each have their region codes (codes assigned

for each region). Playback is not possible if the codes do not

match.

Getting Started

See overleaf

1.DBP-A100_E3_ENG_007.indd 3 2010/08/12 19:20:04

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon DBP-A100 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon DBP-A100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info