NOTE
•Perform operations such as playback and pause on the computer. At this time, you
cannot perform operations with buttons on this unit or the remote control.
•You can also control the volume and equalizer on the computer. Enjoy playing
music at the desired volume.
•When this unit is functioning as a D/A converter, sound is not output from the
computer’s speakers.
•If the computer is disconnected from this unit while the computer music playback
software is running, the playback software may freeze. Always exit the playback
software before disconnecting the computer.
•When an abnormality occurs on the computer, disconnect the USB cable and
restart the computer.
•The sampling frequency of the music playback software and sampling frequency
displayed on this unit may dier.
•Use a cable that is 3 m or less to connect to the computer.
Connect and playback from a digital
device (Coaxial/Optical)
1
Connect digital device to this unit (vpage20).
2
Press SOURCE to select the playback media mode to
“COAXIAL” or “OPTICAL” (vpage28).
The input digital audio signal is displayed as shown.
“COAX: xxxxk” or “OPT : xxxxk”
(xxxx is the sampling frequency.)
•The L.PCM indicator lights when a Linear PCM signal is detected.
•If the sampling frequency cannot be detected, “Unlock” will be
displayed.
2 Files that can be played back
•See “D/A converter” (vpage61).
NOTE
•Do not input non-PCM signals, such as Dolby Digital, and DTS. This causes noise
and could damage the speakers.
•If the sampling frequency switches, such as from A mode to B mode in a CS
broadcast, muting may operate for 1 – 2 seconds, cutting the sound.
