Bedienungsanleitung Denon DCD-2020AE (Seite 13 von 35) (Englisch)

498794

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

Turning the power on

Before using a remote control unit, insert the batteries (vpage23

“Inserting the batteries”).

Press CD X to turn on power to the

unit.

•The power indicator lights green and the

power turns on.

•The “NO DISC” message is displayed if a disc is not loaded.

When power is switched to standby

Press CD X.

The power is set to the standby mode.

GPower indicator statusH

•Normal standby : Red

•Auto standby : Off

•iPod charge standby : Orange

n Turning the power off

Press X on the main unit.

•The power indicator turns off, and so does the power.

•Be sure to stop playback before turning the power off.

•Make sure that the disc tray is completely shut before turning off

the power.

NOTE

Power continues to be supplied to some of the circuitry even when the

power is in the standby mode. When leaving home for long periods

of time or when going on vacation, either press X on the main unit to

turn off the power, or unplug the power cord from the power outlet.

Playback

Setting the top priority playback layer for Super Audio CDs

•The layer that is played with priority when the disc is loaded can be

set.

•Upon purchase, the priority layer is set to the “STEREO”.

Press CD X to turn on power to

the unit.

Check that no disc is loaded.

•If the layer is switched while the disc is being loaded, the playback

layer switches for that disc, but the top priority playback layer

setting itself does not change.

Press SOURCE to set the playback media mode to

“DISC”.

Press DISC LAYER and switch to the layer you want

to set (Super Audio CD only).

STEREO MULTI

STEREO

Plays back the 2-channel area of the Super Audio

CD (the default setting).

MULTI

Plays back the multi-channel area of the Super

Audio CD. The analog output of the DCD-2020AE

outputs a down-mixed 2-channel signal.

Plays back the CD layer of the Super Audio CD.

•When a disc is loaded after the setting has been made, the contents

recorded on the set layer are displayed.

•If a disc that does not contain the layer set for top priority playback

is loaded, the contents recorded on another layer are displayed

automatically.

•This setting is stored in the memory and is not cleared even when

the disc holder is opened or closed or the power is turned off. To

change the setting, repeat the procedure above.

• The priority playback layer cannot be set when a disc is inserted or

“OPEN” is shown on the display.

• During playback of the multi-channel area, the analog output of the

DCD-2020AE plays back a 2-channel downmix.

• If the area and layer have not been set for a disc, the priority playback

order is as follows:

q STEREO w MULTI e CD

• This setting is memorized by the DCD-2020AE and is retained even

if the disc tray is opened/closed or the power is switched on/off.

Please reconﬁgure the settings if you wish to change them.

Operations

Information

Operations

Preparations

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon DCD-2020AE Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon DCD-2020AE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info