Bedienungsanleitung Denon dht-500sd (Seite 9 von 69) (Deutsch)

370600

Zoom out

Zoom in

Vorherige Seite

1/69

Nächste Seite

ENGLISH

(3) Connecting Antennas

The high-performance AM loop antenna provided

with this unit is sufficient for good reception in most

areas.

To stand the loop antenna on a surface, fix the claw

to the slot.

Connect the loop antenna's wires to the AM antenna

terminals as shown.

(Connect the white wire to the upper terminal, and

the black wire to the lower terminal.)

Place the antenna on a shelf, for example, or hang it

on a window frame, etc., in the direction which gives

the best reception, as far away as possible from the

entire system, speaker cords and the power cord, to

prevent unwanted noise.

If there is no room for the AM loop antenna, you may

mount it on the wall using screws (not supplied).

AM Indoor Loop Antenna

AM Outdoor Antenna

If the AM loop antenna provided does not deliver

sufficient reception (often due to being too far from

the transmitter or in a concrete building, etc.), it may

be necessary to use an outdoor AM antenna.

Use an insulated wire more than 15 ft (5 m) long,

strip one end, and connect this to the terminal as

shown.

The antenna wire should be strung outdoors or

indoors near a window. For better reception, connect

the GND terminal to a reliable ground.

Note:

Even when using an outdoor AM antenna, do not

disconnect the AM loop antenna.

AM Antenna

ADV-500SD

BLACK

WHITE

FM Indoor Antenna

Connect the lead-type FM antenna to the FM 75 Ω

socket, extend the lead and fix it to a window frame

or wall with thumbtacks, or the like, where reception

is best.

FM Outdoor Antenna

In an area where FM signals are weak, it will be

necessary to use an outdoor FM antenna.

Generally, a 3-element antenna will be sufficient; if

you live in an area where the FM signals are

particularly weak, it may be necessary to use one

with 5 or more elements.

PART NAMES AND FUNCTION

(1) Front Panel

q POWER (ON/STANBY) switch

• Press this switch to turn the unit on or off

(standby).

w Disc tray

e OPEN/CLOSE (5) button

• Use this button to open and close the disc

tray.

r FUNCTION (DVD, TUNER, VIDEO1,

VIDEO2, TV) button

• This button is used to select a function.

t SURROUND MODE button

• Use this button to select a surround mode.

y PROGRESSIVE SCAN button

• Press this to switch the component video

output between PROGRESSIVE and

INTERLACED SCAN.

u PLAY (1)/BAND button

• In DVD mode, use this button to start

playback.

• In TUNER mode, use this button to select FM

or AM.

• In TUNER mode, press this button for more

than 2 seconds to alternate between Tuning

mode and Preset mode.

i PAUSE/STEP (3)/MEMORY button

• Pause playback or recording temporarily /

press repeatedly for frame-by-frame playback.

• In TUNER mode, use this button to memory

the preset channels.

o STOP (2)/FM MODE button

• In TUNER mode, press this button to select

stereo or monoral mode, while listening to FM

broadcasts.

• In TUNER mode,use this button to clear

Preset Memory.

• In DVD mode, stops playback.

!0 TONE/DIMMER button

• This button is used to adjust BASS and

TREBLE, or to dim the display. Press this

button repeatedly to select BASS, TRE or DIM,

and then turn the VOLUME dial to adjust.

!1 SKIP (8, 9)/TUNING buttons

• In DVD mode, use these buttons to skip

chapters or tracks.

• During PBC playback of a VCD, these buttons

are used to advance the menu page.

• In TUNER mode, use these buttons to tune in

a station.

!2 VOLUME Dial

• Turn the VOLUME dial to adjust the master

volume.

!3 Display

• When the unit is on, the current status of the

unit is displayed.

!4 STANDBY indicator

• This indicator lights when the unit is in the

standby mode.

When the unit is turned on, it goes off.

!5 PHONES

• For private listening, insert the headphones

plug into this jack, and adjust the volume by

turning the VOLUME knob.

!6 REMOTE SENSOR

• When operating the remote control unit, point

it towards the REMOTE SENSOR.

STANDBY

DVD

TITLE CHP

DVD SURROUND RECEIVER ADV-500SD

PHONES

MASTER VOLUME

/SELECT

MEMORYBAND FM MODE

TONE/DIMMER

FUNCTIONON/STAND

TUNING

PROGRESSIVE

SCAN

SURROUND

MODE

o!0

!4!5!6

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon dht-500sd Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon dht-500sd

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info