Bedienungsanleitung Denon DHT-S514 (Seite 12 von 16) (Englisch)

583627

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Using Bluetooth®

DHT-S514 can stream music wirelessly, via Bluetooth, from any compatible Bluetooth device such as a mobile phone, tablet, or laptop computer.

Pairing Your Bluetooth Device

Before you can stream Bluetooth audio to DHT-S514, you must pair your device to DHT-S514.

To pair the device to the DHT-S514 for the ﬁrst time:

1 Press-and-hold the Bluetooth key

(front panel or remote) for at least 3 seconds; the Bluetooth LED will begin to ﬂash rapidly.

2 Go to Bluetooth settings on your device. Make sure the device’s Bluetooth feature is set to “on”.

3 From the Bluetooth list on your device, select “DHT-S514”.

4 Playback audio on the Bluetooth source; you should now hear audio from the DHT-S514. DHT-S514’s Bluetooth key LED will remain on as

long as DHT-S514’s Bluetooth input is selected and active.

DHT-S514 can pair multiple Bluetooth devices; however, only one can play at a time. First come, ﬁrst served. One Bluetooth Source will need to be

disconnected before another paired device can play.

Use Any Remote to Control your DHT-S514

It’s easy to “teach” DHT-S514 to respond to nearly any conventional IR (infrared) remote, so that you may continue to use your favorite television

or cable/satellite. You may prefer to teach DHT-S514 only selected commands, to avoid unintentional operations and subsequent confusion

among some household members. Some DHT-S514 owners teach only Volume Up/Down and Mute, relying on the DHT-S514’s front panel, or

DHT-S514’s own remote, for other functions.

Learning commands (using Volume up as an example):

1 Press-and-hold the front panel’s Learn button

for 3 seconds; its key LED will ﬂash slowly.

2 Now press the front-panel Volume up key; the Volume up key LED will also commence ﬂashing slowly, in sync with the Learn LED.

3 Within 60 seconds, aim the “source” remote (for example, the television handset) from approximately 0.5m directly toward DHT-S514’s

front panel, and press its Volume up key 4 times in slow succession; both ﬂashing DHT-S514 LEDs will now light steadily for 3 seconds,

indicating a successful “learn.”

Unlearning commands

1 Press-and-hold the front panel’s Learn button

for 3 seconds; its LED will ﬂash slowly.

2 Press the button you want to clear; the button’s LED will also ﬂash slowly, in sync with the Learn LED.

3 Press the learn button

within 60 seconds; both LEDs will ﬂash rapidly for 3 seconds. The command has been unlearned.

Seven of the eight DHT-S514 front-panel buttons can be taught to respond to an external remote. Simply repeat this three-step process for as

many of the other DHT-S514 commands (each associated with a front-panel button) as you wish.

Note: Rapid blinking of the two LEDs indicates a failed “learn”. Press any other front-panel or DHT-S514 remote key to reset learning, and start

again. See the Troubleshooting section (vpage 13) for tips to help you successfully teach DHT-S514 to recognize the signals from your remote

control.

Once you have programmed DHT-S514 to respond to your “everyday” remote controller, you may wish to put away the DHT-S514 remote for

safekeeping. If you do, we recommend that you remove the battery, and wrap it in a slip of paper, masking-tape, or similar to prevent accidental

discharge and put it and the DHT-S514 remote someplace safe.

Some remotes can learn by pressing the remote key several times (up to four times).

Pairing the sound bar and subwoofer

The subwoofer and sound bar are paired at the factory. However if the communication is interrupted, follow this procedure.

1 Press the Pair Button on the subwoofer until the Status LED ﬂashes red rapidly.

2 The sound bar power is turned on.

Press the Pair Button on the back of the sound bar. The Status LED on the subwoofer will be solid green.

Status LED

Red LED: Subwoofer not paired to, or searching for sound bar.

Green LED: Subwoofer is paired to sound bar. Your system is ready.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon DHT-S514 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon DHT-S514

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info