Bedienungsanleitung Denon DN-D4000 (Seite 26 von 36) (Englisch, Spanisch)

614639

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Getting started Troubleshooting Speciﬁcations Index

Others Preset

Playback

Connection

In normal playback or pause, press EXIT/RELOOP.

n If the current playback position is before the A-B positions,

•“Exit Off” is shown in the display.

•WhentheplaybackpositionpassestheApoint(startpoint)manualloopplaybackstartsautomatically.

n If the current playback position is after the A-B positions,

•MovestheplaybackpointtotheApoint(startpoint)andmanualloopplaybackstarts.

If the EXIT/RELOOPispressedbeforetheplaybackpointpassestheApoint(startpoint),“ExitLoop”is

shown in the display, and normal playback resumes.

n Exiting auto loop playback

During auto loop playback, press EXIT/RELOOP.

Autoloopplaybackexits,andnormalplaybackresumes.

n Stutter

StuttereffectcanbeusedatA1andA2pointssetasaloopstartpoint.

Press FLIP repeatedly until “STR A1” is shown in the display.

changes to , and the player enters the stutter mode.

Hold down A1 to stutter A1 point.

To return to the loop play mode, press FLIP repeatedly until “H/S A1” is shown in

the display.

A2pointcanbestutteredinthesameway.

n Changing the end point of manual loop playback

During manual loop playback or pause, press B at the position where you want to end

playback.

•The B point (end point) is moved to the position where B was pressed.

n Exiting manual loop playback

During manual loop playback, press EXIT/RELOOP.

“ExitLoop”isshowninthedisplay,andnormalplaybackresumes.

n Returning to manual loop playback

In normal playback, press EXIT/RELOOP.

TheplaybackpositionmovestotheApoint(startpoint)andmanualloopplaybackstarts.

n Adjusting loop points

During manual loop playback, press A1.

Turn the jog wheel while listening to the playback sound, and move to the position

where you want to end playback.

ENGLISH

DN-D4500 has six pitch ranges,

4%, 10%, *16%, 24%, 50% and

100%.

(*Max MP3) When the

RANGE button !4 is pushed

for more than 1 sec, the pitch

range can be selected by turning

the TRACK SELECT knob o.

• When the TRACK SELECT

knob o is pushed down the

pitch range is entered and

the pitch range selection

mode is completed.

PITCH/BRAKE

(1) Pitch

• There are two ways to change the playing speed.

• Adjust the Pitch using the pitch slider !3.

• The PITCH BEND button !2 or jog wheel y can be used to temporarily change the pitch.

• The playing speed can be changed greatly to achieve effect similar to those achievable with analog vinyl.

• If you wish to preserve the original key of sound, set the Key Adjust function to ON.

1-1

[Pitch slider]

Set the variable speed mode.

Push the PITCH button !4 to light

the PITCH LED.

•

PITCH → KEY (key adjust) → OFF

(Green) (Orange) (Off) (LED color)

The Pitch decreases

when the pitch slider !3

is moved upwards,

increases when the pitch

slider !3 is moved

downwards.

1-2

2-1

[PITCH BEND button]

Push the PITCH BEND + (or

PITCH BEND –) button !2.

• The Pitch increases or

decreases temporarily while the

PITCH BEND + or PITCH BEND

– button !2 is pushed.

• The extent to which the PITCH BEND button

!2 changes the Pitch is proportionate to the

amount of time the button is pushed. The

longer the button is held down, the greater

the percentage of change.

2-2

Set the jog wheel to the pitch bend mode.

During playback, pitch bend is setting for the

Jog wheel.

• The playing speed increases

gradually when the jog wheel

y is turned clockwise and

decreases gradually when the jog

wheel y is turned

counterclockwise. When you stop turning

the jog wheel y, the playing speed returns

to the previous speed.

• When playback is stopped, the jog/shuttle

wheel is set to the search mode.

Pitch

decreases

Pitch

increases

SCAN

1-3

• When the track is selected with the TRACK SELECT knob o and the PLAY/PAUSE button !1 is pushed,

playback starts from the beginning of that track. If you wish to start from a different position, use the

procedure described below to search for the desired position.

(2) Starting playback from the Middle of a track (Manual Search)

Find the play start position.

Turn the shuttle ring !7 to change the

playback position quickly. (Search for the

approximate playback position.)

The fast forward/reverse mode

is set when the shuttle ring

(outer side) !7 is turned.

The speed changes according to

the angle at which the ring is

turned.

• When operated during playback, playback

resumes after the operation.

•When playback is started, the jog wheel is

set to the bend mode.

• When turned fully in either direction, the

playback position jumps about 10 seconds.

The jump time can be selected in the preset

mode from 10, 20, 30 or 60 sec.

Turn the jog wheel y. (Search for the precise

playback position.)

When the jog wheel (inner side)

y is turned, the frame move

mode is set.

The playback position can be

moved in units of one frame.

Listen to the sound and find the desired play

start position.

SCAN

RVS FWD

SCAN

Shockproof memory

•A maximum of approximately 20 seconds

uncompressed audio data is stored into memory

(per drive). This guards audible interruptions due

to external mechanical shocks such as bumps

or other hard vibrations.

• If advanced data reading is not possible due to

scratches or dirt on the disc, playback stops

once the data stored up to that point is read.

RVS FWD

NOTE:

• For MP3 discs, frames are not displayed,

however frame resolution is audible by turning

the jog wheel (inner side) y.

(2) BRAKE

• Use this function to achieve effect similar to analog players.

Push the BRAKE button i to light

the BRAKE LED.

• The effect sound is similar to

a DJ turntable coming to a

quick stop. This effect can

be achieved by pushing the

PLAY/PAUSE button !1

during playback.

RVS FWD

•It can be adjusted in 1 frame units.

GAdjustable rangeH

Itcanbeadjustedfrom1frameaftertheApoint(startpoint)totheendofthetrack.

+3 f

End of the track

z AdjustmentrangeforBpoint

Press B at the position where you want to end playback.

B point (end point) adjustment is complete.

B2pointforA2pointcanbeadjustedinthesameway.

n Clear the A1/A2 point

While pressing the FLIP press the A1 or A2toclearthecorrespondingAandBpoints.

Press FLIP/B TRIM for more than 1 sec to clear both A1 and A2 points at once.

Adjusting the track end time

n Brake

Press BRAKE.

TheBRAKELEDlights.

Press PLAY/PAUSE during playback.

The ending time of the track is delayed, and the characteristic like an analog player is obtained.

Operations during playback

See the illustration on the previous page for details of the buttons used for the

operations on this page.

Denon DN-D4000 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info