614639
29
Zoom out
Zoom in
Vorherige Seite
1/36
Nächste Seite
23
Getting started Connection Troubleshooting Specifications Index
PresetOthers
Playback
Others
Memo function
Details set in advance can be stored as memo data on a USB memory device or HDD or Flash Memory.
When you need to configure settings in a short space of time, settings can be configured automatically
SEL. SEL.
TITLE
MEMO
TITLE
MEMO
BACK
PRESET
BACK
PRESET
Details that can be saved as memo data
•Cue point
•Manuallooppoint(A1/B1,A2,B2point)
•Hot start or Stutter
•Playback speed
•Pitch ON or OFF
•Key adjust ON or OFF
•Pitch range
Memo settings
n Memo Set
Save the setting details to memo data.
1
Set this unit with memo data.
2
Press TITLE - MEMO.
“Memo Set?” is shown in the display.
3
Press SEL.
“Complete!”isshowninthedisplay.
•When “MEMO” is shown in the display, memo data has already been saved. Clear the saved memo
data, and redo the setting.
•If memo data cannot be saved, check the remaining capacity of the USB memory device or HDD. It may
not be possible to save memo data if there is not enough spare memory.
•If the USB memory device or HDD is equipped with a security function, check that the security is disabled.
•1000 is the maximum possible number of tracks that can be stored to memory.
However, to simplify the MEMO operations, the memory system manages each 200 MEMO data groups
as a minimum unit (the total 1000 memory capacity divided into 5 memory data groups). When you want
toclearjustoneMEMOdatainthe1MEMOCLEARmode(vpage24), the unit will erase the memo
information but not the internal memo allocation number. Accordingly, depending on conditions, the
number of tracks that can be stored in the memory may be fewer than 1000.
Onceyoureached1000storedpoints,youwillseeamessagethatsays“MEMOFULL!”.Atthistime
you will need to “delete” old data to make room for new memo points. Therefore the oldest 200 memo
points in that group will be deleted and become available.
•The MEMO indicator on the display lights up when a track for which data is stored in the memory is
selected.
29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Denon DN-D4000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info