Bedienungsanleitung Denon DN-D4500MK2 (Seite 31 von 36) (Englisch, Spanisch)

614627

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Getting started Connection

Playback

Troubleshooting Speciﬁcations Index

Others Preset

Preset function

Preset menu map

Setting items Description

Auto Cue Sets the detection level of the sound start point when ignoring the soundless part at

the head of a track at playback.

(A.CUEON*/A.CUEOFF)

Brake Time Setting the track end time

(STEP1/STEP2*/STEP3/STEP4)

Auto Close Time for automatically closing disc holder.

(CloseOFF/Close10s/Close30s*/Close1min)

Jump Time SelectthejumptimeofQuickJump.

(Jump10sec*/Jump20sec/Jump30sec/Jump1min)

P. Range Select the playing pitch range when the power is turned on.

(4%Range/10%Range*/16%Range/24%Range)

EOM Time Sets the notiﬁcation for the time remaining until the end of the track being played back.

(EOMOFF/EOM10sec*/EOM15sec/EOM20sec/EOM30sec/EOM60sec/

EOM 90 sec)

Fader Mode Switches the operation for fader start for the mixer connected to this unit.

Select 1-line (TS) type cable (Play and Pause).

Select 2-line (TRS) type cable (CUE and Play)

(Play/CUE*/PlayPause)

Power Play Switches power on playback on or off.

Playback starts when the power is turned on if a disc is loaded.

(P.PlayON/P.PlayOFF*)

Pitch Select the pitch mode when the power is turned on.

(PitchON*/Key.AdjON(KEYADJUSTON)/PitchOFF)

Play Mode Select the play mode when the power is turned on.

(Single/Cont./PlayLock*)

Time Mode Select the time mode when the power is turned on.

(Elapsed*/Remain)

Bpm Disp Select the BPM display

(DispON*/DispOFF)

Relay Mode Switches relay playback on or off.

(RelayON/RelayOFF*)

Relay Time Select the crossover time the currently playing track when the opposite drive start to

play with the Relay Play function.

(RelayOsec*/Relay1sec/Relay2sec/Relay3sec)

Setting items Description

MemoClear MemoClear(MEMOALLCLEAR)

NOTE: This PRESET item can be only performed in CD1 (left side) of the remote

controller.

Clear all MEMO data in the non-volatile memory.

q To clear all MEMO data, press the

SEL. down.

“Clear OK?” ﬂashes on the character display.

w Press the TRACK SEL. down again and select “OK” to execute clearing all MEMO

data.

“Memo Clear” is displayed on the character display while clearing.

e Onceclearingiscompleted,“Complete!”isdisplayed.

Version No The DN-D4500MK2’s software version is displayed.

(SYSTEM/DSP/SER/RC)

Preset Int Set all the preset data back to the factory defaults.

q To clear the PRESET data, press the

TRACK SEL. down.

“Initial OK?” ﬂashes on the character display.

w Press the SEL. down. again and select “OK” to start clear the preset data.

“Preset Int” is displayed on the character display while data clearing.

e Once clearing is completed,

“Complete!”isdisplayed.

The “*” mark next to the data indicates the default value.

How to adjust the various Preset settings

Hold down •BACK –PRESET.

“PresetMode” is displayed.

Turn SEL. to select the setting item.

Press SEL. to enter the selected item.

Press •BACK –PRESET.

“Now Saving” is displayed.

Conﬁguration is complete.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon DN-D4500MK2 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info