614640
8
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
8
ENGLISH
!0
PLAY/PAUSE button (13)
This button will start or pause playback.
Push once to start playback, once again to
pause playback, and once more to resume
playback.
!1
CUE button
Pushing this button in play mode will force the
track back to the position which playback
started. While in search mode, it makes new
Cue point. (Cue)
In Cue mode, by pushing the CUE button
makes a Stutter sound from the Cue point. This
is called Stutter play. (Stutter)
!2
Scratch Disc
Use this vinyl scratch disc for scan, manual
search, Pitch Bend and Scratch operations.
!3
FLIP/CLR button
FLIP:
Use this to select operating mode of A1 and A2
buttons, from Hot Start mode and Stutter
mode. The display will indicate “H/S” or “STR”
A1, A2 CLR:
If the A1 or A2 button is pushed while pushing
the FLIP button, you can clear the selected A
point.
By holding down just the FLIP button for more
than 1 sec, you can clear A1 and A2 points all
at once.
!4
(SAMP) RVS/CLR button
(SAMP)RVS:
Use this to select the sample play direction
forward and reverse. When select reverse RVS
LED lights up.
(SAMP) CLR:
If the SAMP button is pushed while pushing
the this button, you can clear the SAMP data.
Or, by holding down just the this button for
more than 1 sec.
(3) RC-D60 Front panel
CAUTION:
Note that there are many buttons working two
different function selected by short time
pushing or long pushing (1second or more). The
mark indicates short time push function and
mark indicates long time push function.
!5
A1, A2 button
Using this button you can create starting point
for Hot Start, Seamless Loop and Stutter.
!6
SAMP button
Push this button to record or play sound of
Sampler.
!7
B button
Use this to set the B point for to create a
Seamless Loop after the A point has been set.
!8
(SAMP) B button
Use this to set the Sampler loop B point.
!9
EXIT/RELOOP button
• Use this to exit or return back again to
Seamless loop playback. You can add variety
to looping with this function.
@0
(SAMP)EXIT/RELOOP
Use this to turn the Sampler Loop mode on
and off. Also acts as EXIT/RELOOP button for
Sampler Loop to exit or back again.
@1
NEXT TR./B TRIM button
When the button is pressed during playback,
the NEXT TRACK MODE is selected. If the
button is pressed again, the B TRIM MODE is
selected.
In the standby and pause modes, only the B
TRIM MODE can be selected.
@2
(SAMP.) STOP button
Push this button while in Sampler record or
playback, Sampler record or playback stops.
@3
TITLE button
CD TEXT:
When there is CD text data, the CD text data
is displayed automatically or when the button
is pressed.
If no TEXT is available, the display will indicate
“No TEXT”.
MP3:
When an MP3 file has ID-3 tag data, the title,
artist name and album name are selected and
displayed each time the button is pressed.
3
PART NAMES AND FUNCTIONS
(1) Front panel
q
POWER button (¢ON £OFF)
Push this button to turn power on and off.
w
POWER indicator
This lights when the power is on.
e
Disc loading slot
Load the disc slowly, and release it once the
DN-D6000 starts grabbing the disc in.
r
Disc slot LED
This flashes while the disc is ejecting.
The LED lights when the disc is not loaded and
serves as the disc slot illumination.
t
DISC EJECT button
Push this button to eject the disc.
The disc will not eject during playback.
Stop playback before pushing this button.
y
Analog output jacks
(LINE OUT)
This is unbalanced RCA output jacks.
Audio signals outputs.
u
Fader start jack
Use this when your mixer has Fader Start
function with 3.5 mm stereo mini cord.
i
Digital output jack
Digital data is available from this jack.
Use 75 /ohms pin cord for connection.
We recommend you use braided wire type
shielded cable.
NOTE: The playback level after analog
conversion is set to -12dB bellow the
usual level to avoid digital distortion.
o
Remote connector (REMOTE)
Connect this connector to the RC-D60 using
the included cord.
(2) Rear panel
CAUTION:
Do not turn off the power while a disc is
loading or being ejected. Otherwise loading
mechanism may be damaged.
CAUTIONS:
Do not load discs when the power is turned
off.
Do not try to forcibly remove a disc once
the DN-D6000 has started to grab the disc.
Do not load more than once disc at a time
or insert anything other than discs.
Otherwise loading mechanism may be
damaged.
NOTE:
Please clean the dirt of the label side of a disc
and start loading of the disc.
The dirt causes a slip of a disc loader roller.
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Denon DN-D6000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info