15
ENGLISH
Trim B point
e Turn Scratch Disc slowly to
move the B point 1 frame at
a time.
• Range for trimming B point is limited as
follows.
B point for Loop:
Between 5 frames after A point and
disc end.
B point for Sampler:
Between 5 frames after A point and
Sampler end.
*MP3
Between 5 frames after A point and file
end.
9
B TRIM
1
q When the NEXT TR./B TRIM button is
pressed during seamless loop playback,
the B TRIM mode is turned on.
When the NEXT TR./B
TRIM is pressed during
playback,the NEXT TRACK
mode is set. If the button
is pressed again without
performing the NEXT
TRACK mode operation,
the B TRIM mode is
selected.
3
2
Select B point
w The A button illumination
automatically flashes for the
last loop created or
accessed.
• Or the A button or the SAMP button is
selected pressing.
• The Seamless Loop and Sampler B points can be fine-adjusted using the Scratch Disc.
• Trim the points during loop playback as a rehearsal.
B Trim
4
Save the B point
r Push the A or SAMP button
again to save new B point,
and the unit automatically
exit from the B Trim mode.
10
AUTO BPM COUNTER / EFFECTOR
AUTO BPM COUNTER
1
BPM LOCK
The data measured by the auto
BPM counter is locked.
q Push the TAP button once
while auto BPM counter is
operating.
“BPM Lock” is displayed for 1 second.
3
2
AUTO BPM COUNTER
Beats per minute (BPM) of a track is measured automatically and displayed during playback or in Cue
standby mode.
Measured BPM values are synchronized with the effector parameters such as:(ECHO/LOOP and FLANGER
time)
• When Auto BPM COUNTER is off, pushing the TAP button for 1 second, reactivates the AUTO BPM
COUNTER to turn back on.
• If you change or select a new track, the old BPM is cleared and the Auto BPM Counter starts to detect the
new track automatically.
TAPPING
The interval when the TAP
button is pushed repeatedly is
measured and BPM is
calculated.
w When you push the TAP
button, the auto BPM
counter turn off.
Push the TAP button repeatedly about
5~10 times according to the beat.
MANUAL INPUT
The known BPM can be dialed
in directly by the numerical
value.
e The BPM manual input
mode is available when the
TAP button is pushed for
more than 2 sec. “Manual
In” is displayed is the
screen.
r You can input BPM value
directly with the
PARAMETERS knob.
t When the TAP button is
pushed again, the BPM
manual input mode is
turned off and the BPM is
locked to that value.
NOTE:
AUTO BPM COUNTER might not be able to be measured correctly according to the music.
*If this happens, please use the TAP feature.
