Bedienungsanleitung Denon DN-MC6000 (Seite 9 von 34) (Englisch)

614637

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

Before use

Part names and

Functions

Connections

Basic

operations

Installing and setting up

supplied software

USB settings

Troubleshooting

Index

Speciﬁcations

System diagram

Other

functions

Before use

Main features

1. Operability and highly reliable design for professional use

• Equipped with 4ch digital mixer that can operate independently

with or without a computer connection for fail safe operation and

backup.

• Equipped with an input selector for various input sources such as

USB Audio and LINE.

• Each input channel includes a 3-band isolator EQ.

2. USB MIDI controller

• Equipped with a physical controller function that controls DJ

software.

• Design layout optimized for operations with Virtual DJ and

TRAKTOR.

• Easy operations for video effect and cross fade functions in Virtual

DJ.

• Equipped with a deck layer function that can control four decks

separately.

• Equipped with a high resolution jog wheel with 2,048 pulses

supporting the touch sensor function.

• Equipped with large CUE/PLAY buttons that can be pressed easily.

• Equipped with the SYNC button that can immediately synchronize

beats for two decks, when used with software.

• Equipped with the FX select function that can control two different

FX separately, when used with software.

• High grade steel cabinet and self-illuminating rubber buttons.

3. USB AUDIO interface

• High sound quality design that supports sampling frequency of 48

kHz.

• Supports 2in-2out for stereo audio.

• Supports transfer of mixed audio to computers.

• Supplied with ASIO drivers for low latency.

4. MIC echo function

• Equipped with an echo function dedicated for MIC input.

• Echo volume can be adjusted with MIC echo adjustment knob.

5. Various input/output terminals

The unit has the following input/output terminals.

Input

• LINE/PHONO x2

• AUX x2

• MIC input x2

Output

• Master x1

• Booth/send x1 (dual-purpose)

• REC output x1

Input/output

• USB audio x2 (stereo input x2/stereo output x2)

6. Others

• Equipped with a ducking function that attenuates background

sounds during MIC operation.

• Equipped with a auto standby function (eco mode)

• Supplied with DJ software

Cautions on handling

• Before turning the power switch on

Check once again that all connections are correct and that there are

no problems with the connection cables.

• Power is supplied to some of the circuitry even when the unit is

set to the standby mode. When going on vacation or leaving home

for long periods of time, be sure to unplug the power cord from the

power outlet.

• About condensation

If there is a major difference in temperature between the inside of

the unit and the surroundings, condensation (dew) may form on

the operating parts inside the unit, causing the unit not to operate

properly.

If this happens, let the unit sit for an hour or two with the power

turned off and wait until there is little difference in temperature

before using the unit.

• Cautions on using mobile phones

Using a mobile phone near this unit may result in noise. If that

occurs, move the mobile phone away from this unit when it is in use.

• Moving the unit

Turn off the power and unplug the power cord from the power

outlet. Next, disconnect the connection cables to other system units

before moving the unit.

• About care

• Wipe the cabinet and control panel clean with a soft cloth.

• Follow the instructions when using a chemical cleaner.

• Benzene, paint thinner or other organic solvents as well as

insecticide may cause material changes and discoloration if brought

into contact with the unit, and should therefore not be used.

n Attaching 19 inch rack mount brackets

DN-MC6000 can be installed in an EIA standard 19 inch rack by

attaching the supplied rack mount brackets.

q Remove the side panel ﬁxing screws on DN-MC6000 to take off

the side panels.

w Attach rack mount brackets to the DN-MC6000 by using the

side panel ﬁxing screws or the supplied screws.

MONITOR

MIC

MASTER

BOOTH/

SEND

MASTER

q Take off side panels

w Attach rack mount

brackets

NOTE

Do not use other screws. Doing so may cause damage to the threads.

n Mounting in a rack

Set up the installation environment carefully. For example, take

care to protect the DN-MC6000 from heat caused by other devices.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon DN-MC6000 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info