Bedienungsanleitung Denon DN-S3000 (Seite 11 von 36) (Englisch, Spanisch)

614642

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

ENGLISH

• Each push of the i PLAY/PAUSE (13) button

switches between playback and pause.

PLAY/PAUSE (

13) button illuminates solid green

during playback and flashed in pause.

• When the i PLAY/PAUSE (

13) button is pushed

during play, the DN-S3000 pauses playback at that

point. Push i PLAY/PAUSE (

13) button once

again and playback resumes.

• When the Scratch mode is set to MAIN, the Platter

turns when the Main Track is played. When the

rotation of Scratch Disc is stopped by pressing with

the finger, the pause mode is set, and when the

finger is released playback resumes.

NOTE:

Standing up of playback

slows unusually after trans

porting the product.At the

time, push center of the !1

Scratch Disc lightly.

BASIC OPERATION

Play and pause

Push the #6 PITCH/KEY

button to PITCH LED lights up.

• PITCH → KEY (key adjust) → OFF

Move the #5 Pitch slider to adjust

the pitch. The current pitch setting

is displayed on the display.

Pitch decreases

Pitch increases

• When the !0 CUE button is pushed during playback,

the track stops and returns to the position that

current playback started (Cue point) and prepares

for next playback. This function is called Back-Cue.

With Back-Cue function, you can start from exactly

same position. The !0 CUE button illuminates solid

red when DN-S3000 is ready to start playback.

• You can set and change Cue point as follows.

• When you started playback.

• Track select finished.

• manual search.

Play and Cue

• If you would not like to start playback from

beginning of the track, you need to move Cue Point

using fast Search and manual search function.

• With Pitch slider you can adjust the playback speed

(Pitch).

• If you would not prefer to change key of sound, use

the Key Adjust function.

Adjusting the pitch

DN-S3000 has five pitch ranges,

4%, 10%, 16%, 24% 50% and

100%.

When the #6 RANGE

button is pushed for more than 1

sec, the pitch range can be

selected with the #0

PARAMETERS knob.

After you found your

preferred Cue point, push

the !0 CUE button then new

Cue point is set.

Push the @9 SCRATCH

MODE button for more than

1 sec to set @9 Scratch Disc

to search mode. The

SCRATCH MODE button

LEDs will turn off.

Turn the !1 Scratch Disc to

change Cue point. You can hear

the short sound of the current

Cue point.

When !1 Scratch Disc is turned in the pause,

standby or frame repeat mode, works as the

manual search function.

• With PITCH BEND function you can change pitch

temporary. DN-S3000 has three ways for this

function PITCH BEND buttons and Scratch Disc.

Pitch Bend

[PITCH BEND +/– buttons]

• Push the #3 PITCH BEND

– or #4 + button for

momentary change of

pitch.

While holding these buttons down, the pitch

continues to change up to the limitation.

• After releasing the PITCH BEND buttons,

playback pitch returns to slider setting.

[Scratch Disc]

• When the Scratch mode is

set to SEARCH, the playback

speed can be changed by

turning !1 Scratch Disc

during playback.

• The pitch increases gradually when the

Scratch Disc is turned clockwise and

decreases when turned counterclockwise.

• When you stop turning the Scratch Disc, the

playing speed returns to the previous pitch.

PITCH BEND

When the Scratch source is

set to MAIN and the Platter is

turning, playback of the Main

source can be slowed

temporarily by lightly pressing

!1 Scratch Disc or PLATTER.

In addition, playback can be quickened

temporarily by pushing Scratch Disc or

PLATTER in the direction in which the Platter

is turning.

• Turn the #0 TRACK knob.

• By pushing #0 TRACK knob down while turning, the

tracks will change 10 at a time.

Select the track

Move the Cue point

You can move to the approximate playback

start position by #1 or #2 FAST SEARCH

buttons.

[1-MIN.SKIP]

• If the FAST SEARCH button

is pushed short time, the

playback position skips for about 1 minute.

[FAST SEARCH]

• When the FAST SEARCH button is pressed

and held in, the disc is fast-searched.

Relay playback

• Relay Play function is a playback mode to continue

play tracks of CDs in two DN-S3000s.

• Connect the X-EFFECT IN/OUT terminals between

two DN-S3000s.

Start Relay Play

q Push the RELAY button

for more than 1 sec to

enable Relay play mode.

You can set Relay mode

as below.

• In the single play mode, when the one

player’s playback reaches end of track,

another DN-S3000 starts playing.

• In the continuous play mode, when the

whole tracks on one side are finished,

another DN-S3000 starts.

• The discs in two DN-S3000s can be

played alternately by setting both DN-

S3000 to the relay play mode.

• Relay play can be set in the program and

random play modes.

• Relay play is possible also for DN-S3000

or DN-S5000.

Stop Relay Play

w When the RELAY button

is pushed for more than 1

sec while in the relay play

mode, the relay play

mode is turned off.

Power on play

• When “POWER ON PLAY” is set to “ON” at “⁄4

PRESET (8)”, playback starts from the first track on

the disc when the power is turned on.

q, w

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon DN-S3000 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info