Bedienungsanleitung Denon DN-S3700 (Seite 9 von 36) (Englisch)

614644

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite



Connections Playback Speciﬁcations

Basic Operations Memo Function Utility

Part Names and Functions

Top Panel

q PLAY/PAUSE button (1 3)

• This button will start or pause playback.

• Push once to start playback, once again to pause

playback, and once more to resume playback.

w CUE button

Pushing this button in play mode will force

the ﬁle back to the position which playback

started. While in search mode, it makes new

Cue point.

•

QUICK JUMP button, -FAST SEARCH button

(6) (7)

⋅

QUICK JUMP:

The play position jumps backward when the

(6) button is pressed and immediately

released.

The play position jumps forward when the

(7) button is pressed and immediately

released.

⋅

FAST SEARCH:

When one of these buttons is pressed and

held in, the disc is fast-searched in the reverse

(6) or forward (7) direction.

r FILTER button

One of three ﬁlters (LOW PASS, MID PASS and

HIGH PASS) can be selected.

t FLANGER button

The depth and delay time can be selected.

y ECHO/LOOP button

The ECHO and LOOP functions can be selected.

The feedback level and delay time can be selected.

Looping for the delay time (ECHO LOOP) is

possible by setting the feedback level to “MAX”.

u TAP button, -AUTO/INPUT BPM button

⋅

TAP:

When you push this button repeatedly, the

Auto mode turns off and starts measuring your

Beats Per Minute (BPM) by tapping.

⋅

AUTO:

When pushing the

TAP button for 1 second,

activates AUTO BPM mode. The measured

BPM is displayed in the character section of

the display.

⋅

BPM LOCK:

When this button is pressed once while the

Auto BPM counter is operating, the data

measured by the Auto BPM counter is locked.

⋅

MANUAL INPUT:

When the

TAP button is pressed and held in

for more than 2 seconds, the BPM input mode

is set and the BPM value can be input directly

with the

EFFECTS knob. When the TAP button is

pressed again, the BPM input mode is turned off.

E7 E4E5E6E8R0 E9R1

Q9Q8Q7Q6Q5 W1 W2 W3

Note that there are many buttons working two different function selected by short time pushing or long

pushing (1 second or more). The “⋅” mark indicates short time push function and “–” mark indicates long

time push function.

NOTE

• If you select a new ﬁle, AUTO BPM mode turns

on automatically.

• BPM data can be saved to the MEMO function.

i LOOP TRIM +/– button

These buttons are used to Trim the length of the

loop by “frames” during auto loop playback and

adjust the BPM data.

o Vinyl playback direction selector lever

Use this select direction of Vinyl playback.

⋅

FWD:

When the Vinyl disc is turned, the Vinyl playback

sound is output from forward direction only.

⋅

BOTH:

When the Vinyl disc is turned, the Vinyl playback

sound is output from both the reverse and

forward directions.

Q0 EFFECTS knob

Use this knob to set the internal effector’s Dry/

Wet parameters, Length of the auto loop and

BPM data.

Q1 MEMO button, -PRESET button

⋅

MEMO:

Various settings such as Cue Point, Hot Starts,

Loops, BPM, Pitch and Key Adjust can be

saved for later recall.

⋅

PRESET:

When this button is pushed for more than 1

sec, the PRESET mode menu is displayed.

The machine status must be in CUE, PAUSE

or No Disc mode before entering the preset

mode.

Q2 AUTO LOOP SET button

This button is used to set the Auto Beat Loop

mode. When set ON (led lights up), buttons 1, 2,

3 can be used to create Auto Beat Loops.

Q3 HOT START / AUTO LOOP buttons

These are where the hot start points or the auto

loop playback start points are stored.

⋅

HOT START:

⋅

The 1, 2, 3 buttons will light up dimly in green

indicating the Hot Start points are available

to store.

Once a Hot Start is stored, the button lights

up strongly in green.

⋅

AUTO LOOP:

⋅

The 1, 2, 3 buttons light up dimly in red

during Auto Loop mode indicating the Auto

Loop points are available to store.

Once an Auto Loop is stored, the button

lights up strongly in red.

Getting Started

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon DN-S3700 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon DN-S3700

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info