Bedienungsanleitung Denon DN-S3700 (Seite 24 von 36) (Englisch)

614644

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite



Getting Started Connections Playback SpeciﬁcationsMemo Function Utility

Effector

One of the three types can be selected.

Echo/loop Parameter Setting



Turning echo/loop on.

Press the

ECHO/LOOP button.

The PARAMETERS knob lights and the parameters

setting screen is displayed.

b When echo/loop indicator is solid (not blinking), press the

ECHO/

LOOP

button to set the parameter selection mode again.



Setting the echo/loop parameters.

y Turn both the

PARAMETERS

knob and the

EFFECTS

knob to set the echo/loop

parameters.

The PARAMETERS knob ﬂashes.

b The echo feedback level can be set with the

EFFECTS knob, the

echo delay time with the PARAMETERS knob.



Performing echo/loop playback.

When the feedback level is set to the maximum, echo/loop

playback begins with the specified delay time.

b During echo/loop playback, it is possible to search for tracks and

switch between the ﬁle play mode and playlist play mode.

Loop fade-out:

In the parameter selection mode, when the back cue or next

track mode is turned on during echo/loop playback, the parameter

selection mode is turned off.

When a new track is selected and playback is started, echo/loop

playback fades out and stops. This makes for a smooth transition

between echo/loop playback and normal playback.



u Press the

PARAMETERS

knob

or the

PLATTER MODE

button

to turn off the parameters

setting screen.



i Press the

ECHO/LOOP

button while the

echo/loop parameters setting screen is

displayed.

Turning echo/loop off.

Auto BPM Counter

The BPM for the currently playing track or the track at which

the cue standby mode is set is measured automatically and

displayed.

• When the auto BPM counter is off, press the TAP button for

over 1 second to turn the auto BPM counter on.

• When the auto BPM counter is off, it turns on when the track

changes.

NOTE

It may not be possible to automatically measure the BPM accurately

for some tracks.

In this case, perform the “TAPPING” or “MANUAL INPUT”

procedure.



BPM LOCK

The data measured with the auto BPM function is

locked.

q When the auto BPM counter is on,

press the

TAP

button and release it

immediately.

“BPM LOCK” is displayed for about 1 second.



TAPPING

The BPM is measured according to the

interval between repeated pressings of

the

TAP button.

When the TAP button is pressed, the auto BPM counter turns

off.



w Press the

TAP

button repeatedly 5 ~ 10 times to the

beat of the music.



MANUAL INPUT

e Press and hold in the

TAP

button for

over 2 seconds.

The BPM can now be input manually.

The “Manual In” is displayed.

Turn the

EFFECTS

knob and input the BPM value.

b Turn the EFFECTS knob while pressing it to input

values below the decimal point.

b When the TAP button is pressed again, the value you

have input is set and the BPM value is locked.

NOTE

If the MP3 or WAV ﬁle includes BPM information in the memo data,

this value is displayed as the initial value. The AUTO/TAP/MANUAL

value can be ignored as this information is more detailed.

Q5Q7

Basic Operations

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon DN-S3700 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon DN-S3700

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info