Bedienungsanleitung Denon DN-S5000 (Seite 13 von 49) (Englisch, Spanisch)

614645

Zoom out

Zoom in

Vorherige Seite

1/49

Nächste Seite

ENGLISH

• Each push of the o PLAY/PAUSE (13) button

switches between playback and pause.

PLAY/PAUSE (

13) button illuminates solid green

during playback and flashed in pause.

• When the o PLAY/PAUSE (

13) button is pushed

during play, the DN-S5000 pauses playback at that

point. Push PLAY/PAUSE (

13) button once again

and playback resumes.

• When the Scratch mode is set to MAIN, the Platter

turns when the Main Track is played. When the

rotation of Scratch Disc is stopped by pressing with

the finger, the pause mode is set, and when the

finger is released playback resumes.

BASIC OPERATION

Play and pause

Push the $2 PITCH/KEY

button to PITCH LED lights up.

• PITCH → KEY (key adjust) → OFF

Move the $1 Pitch slider to adjust

the pitch. The current pitch setting

is displayed on the display.

Pitch decreases

Pitch increases

RANGE

PITCH / KEY

• When the !1 CUE button is pushed during playback,

the track stops and returns to the position that

current playback started (Cue point) and prepares

for next playback. This function is called Back-Cue.

With Back-Cue function, you can start from exactly

same position. The CUE button illuminates solid red

when DN-S5000 is ready to start playback.

• You can set and change Cue point as follows.

• When you started playback.

• Track select finished.

• manual search.

Play and Cue

• If you would not like to start playback from

beginning of the track, you need to move Cue Point

using fast Search and manual search function.

Move the Cue point

You can move to the approximate

playback start position by fast-

forwarding and fast-reversing

using the #1 FAST SEARCH knob.

• With Pitch slider you can adjust the playback speed

(Pitch).

• If you would not change key of sound, use the Key

Adjust function.

Adjusting the pitch

DN-S5000 has five pitch ranges,

4%, 10%, 16%, 24% and 100%.

When the $2 RANGE button

is pushed for more than 1 sec,

the pitch range can be selected

with the PARAMETERS knob.

RANGE

PITCH / KEY

After you found your

preferred Cue point, push

the !1 CUE button then new

Cue point is set.

Turn the !4 SCRATCH source

select knob to select Scratch

Disc to search mode. The all

Scratch mode LEDs will turn

off.

Turn the !2 Scratch Disc to

change Cue point. You can hear

the short sound of the current

Cue point.

When Scratch Disc is turned in the pause,

standby or frame repeat mode, works as the

manual search function.

• With PITCH BEND function you can change pitch

temporary. DN-S5000 has three ways for this

function PITCH BEND buttons and Scratch Disc.

Pitch Bend

[PITCH BEND +/– buttons]

• Push the #9 PITCH BEND

– or $0 + button for

momentary change of

pitch.

While holding these buttons down, the pitch

continues to change up to the limitation.

• After releasing the PITCH BEND buttons,

playback pitch returns to slider setting.

[Scratch Disc]

• When the Scratch mode is

set to SEARCH, the playback

speed can be changed by

turning !2 Scratch Disc

during playback.

• The pitch increases gradually when the

Scratch Disc is turned clockwise and

decreases when turned counterclockwise.

• When you stop turning the Scratch Disc, the

playing speed returns to the previous pitch.

PITCH BEND

When the Scratch source is

set to MAIN and the Platter is

turning, playback of the Main

source can be slowed

temporarily by lightly pressing

!2 Scratch Disc or PLATTER.

In addition, playback can be quickened

temporarily by pushing Scratch Disc or

PLATTER in the direction in which the Platter

is turning.

FAST SEARCH

SEARCHMAIN

SAMP.

TRACK

• Turn the #4 TRACK knob.

• By pushing #4 TRACK knob down while turning, the

tracks will change 10 at a time.

Select the track

• Normally the BPM for the currently playing track is

measured and displayed on the auto BPM counter.

NOTE:

For some tracks the BPM cannot be measured

properly.

BPM LOCK:

When this button is pressed once while the auto

BPM counter is operating, the data measured by

the auto BPM counter is locked.

TAP:

When you push this button repeatedly, the Auto

mode turns off and starts measuring your Beats Per

Minute (BPM) by tapping.

INPUT BPM:

When the TAP button is pressed and held in for

more than 2 seconds, the BPM input mode is set

and the BPM value can be input directly with the

PARAMETERS knob. When the button is pressed

again, the BPM input mode is turned off.

NOTE:

If you select a new track, AUTO BPM mode turns

on automatically.

BPM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon DN-S5000 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info