614645
22
Zoom out
Zoom in
Vorherige Seite
1/49
Nächste Seite
20
ENGLISH
Alpha-Track Hot Start mode
Like with buttons A1 and A2, operation is performed
using the (RVS)/FLIP/(CLR), A3, A4 and EXIT/RELOOP
buttons. (Refer to page 16.)
Hot start mode
Like with buttons A1 and A2, operation is performed
using the (RVS)/FLIP/(CLR), A3, A4 and EXIT/RELOOP
buttons. Operation is same as Hot Start with A1, A2
buttons. See page 16 for details.
6
Exit and Reloop
u The EXIT/RELOOP button
can be used same as
Seamless Loop function.
7
Reverse Play
i You can play Sampler sound in
reverse with push RVS (FLIP)
button. In reverse play mode
RVS LED lights up.
Reverse playback will start with next
playback starting after reverse mode
turned on.
9
Setting the Sampler volume and pitch
The sound level (volume) and pitch can be
set individually for Sampler1 and 2.
See m - step 8 Adjust sound level and
pitch.
10
Clearing the Sampler data
!0 While pressing the (RVS)/FLIP/(CLR)
button, push the SAMP button (SAMP1 or
SAMP2) to clear the Sampler.
By pushing the (RVS)/FLIP/(CLR) button
for approx. 1 sec, you can clear both
Samplers 1 and 2.
8
Moving Sampler B point
o When the B button is
pushed during Sampler
playback, the B point moves
to the point at which the
button was pushed, and loop
playback from point A starts.
y, ui, !0 w, oq, r, !0
e, t
1
Record in Sampler
q When the SAMP button
(SAMP1 (A3) or SAMP2 (A4))
is pushed in the standby or
playing, the sound from A3
or A4 point is recorded to
Sampler memory up to 15
seconds.
The SAMP1 or SAMP2 button is flashing
while recording. When the recording is
completed, the button turns off and the
corresponding SAMP B LED lights up.
4
Play Sampler sound
r Playback of the Sampler
sound starts when the
SAMP button is pushed after
recording has stopped.
Sampler playback continues in looping.
With setting B point, playback loop
between A and B point. Without B point
setting Sampler loops whole recorded
length (about 15 seconds).
NOTE: It is not possible to play Sampler1
and Sampler2 at the same time.
t To stop the Sampler
sound push STOP (a CUE)
button.
Sampler
Stop recording
e To stop recording before
recording finish
automatically with
memory full, push the
STOP (a CUE) button.
The EXIT/RELOOP LED light to indicates
Sampler Loop mode is set automatically.
3
SAMP. STOP
DN-S5000 has two Samplers of 15 seconds length. These Samplers are also used in looping playback.
2
Setting B point
w When the B button is
pushed during Sampler
recording, the Sampler Loop
B point is set and the loop
mode turns on.
Recording continues for approximately
15 seconds without stopping after set B
point.
If the B point is not set, recording end
point set as B point automatically. Also
EXIT/RELOOP LED light to indicates
Sampler Loop mode is set automatically.
Select Sampler Loop mode
You can select loop mode for Sampler when
Sampler playback stop.
Loop (default):
Sampler playback continues with
looping.
(EXIT/RELOOP LED stays lit)
Exit: Sampler playback continues over B
point up to recording length.
(EXIT/RELOOP LED flashes)
Single: Sampler playback stops at B point.
(EXIT/RELOOP LED turned off)
y To select loop mode, push
EXIT/RELOOP button after
recording and before playing.
5
SAMP. STOP
22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Denon DN-S5000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info