Bedienungsanleitung Denon DN-SC2900 (Seite 40 von 57) (Englisch)

614625

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

Getting started Part names and functions Preparations Connection MIDI Control Troubleshooting Speciﬁcations Index

Others Settings

Playback

Relay playback

•When multiple DN-SC2900 units are connected on the network,

tracks are played back in the order of the registered “Network ID”

number. A maximum of four DN-SC2900 units can be connected.

•Before starting, use “Utility” – “Preset Setting” – “Network ID”

(vpage44) to set the Network IDs.

Set “Utility” – “Preset Setting” – “Relay” (vpage 45)

to “ON”.

The mode switches to relay playback.

•In relay playback, tracks are played in the following order.

•If relay playback mode is off for a unit, tracks are not played.

•If a “Network ID” number is missing, the number is skipped for

playback.

“Network ID” : 1 “Network ID” : 2

“Network ID” : 4 “Network ID” : 3

•When “OFF” is selected in “Utility” – “Preset Setting” – “Relay”

(vpage45), normal playback is resumed.

•If relay playback mode is set to ON during playback, relay playback

starts from the next track.

n About the track playback order

Depending on the playback mode, the track playback order differs.

For details, see “Setting playback mode” (vpage26).

In SINGLE playback mode

When playback of the track ends, playback of the next track starts on

the player registered with the next “Network ID”.

In CONTINUOUS playback mode

When playback of the last track ends, playback of the ﬁrst track starts

on the player registered with the next “Network ID”.

Network playback operations

Automatically adjusting BPM

When multiple DN-SC2900 units, are connected on the network, the

BPM value from the desired player (MASTER) is set as the BPM on all

otherplayers(Slave)(BPMSYNCfunction).

n Set as “Master”

This sets the device that will be the standard when adjusting the

BPM value.

Press and hold BPM SYNC on the device that you want

to be “MASTER”.

•“SYNCMaster”appearsonthedisplay.

•BPM SYNC ﬂashes, and the “Master” setting is complete.

•When the “Master” is set, all other connected players are set as

“Slave”.

•If another player is already set as “Master”, set the other players to

“Slave” before setting the desired unit to “Master”.

n Setting the “Master” BPM to the “Slave” BPM

Press BPM SYNC on the unit set as “Slave”.

•“BPM-SYNC”isshowninthedisplay,andtheBPMissettothe

“Master” BPM.

•The PITCH indicator ﬂashes, and the pitch value is shown in the

display.

•Pitch adjustment is locked.

•When the pitch value at which the pitch slider is locked is matched,

the pitch lock is released.

•Even if the connection between units in the BPM SYNC status is

cancelled, pitch lock is maintained.

•When the track on the “Master” unit changes, the “Master”

settings are transferred to the initially synced “Slave”. At this time, if

the pitch is locked for the “Master” device, pitch lock is maintained.

NOTE

This setting cannot be used unless one of the devices is set to

“Master”.

HOT CUE 1 ~ 4

SEL.

BPM SYNC

MIDI BANK 2 MIDI

Pitch slider

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon DN-SC2900 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info