Bedienungsanleitung Denon DN-SC2900 (Seite 50 von 57) (Englisch)

614625

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

Getting started Part names and functions Preparations Connection MIDI Control

Playback

Troubleshooting Speciﬁcations Index

Others Settings

Save As Def.

Saves the current pitch range settings (vpage28), time display settings for the display (vpage9),

playback mode settings (vpage26) and key adjustment settings (vpage 28) as the initial settings

when the power is switched on.

Setting details

CANCEL : The screen returns to the previous screen without saving the settings.

OK : The settings are saved and the screen returns to the previous screen.

Preset Setting

Default settings are underlined

These settings are for unit operations or playback.

Setting items Setting details

Unit No.

Sets the number of this unit

thatASIOdriverrecognizes

when connected to a

computer.

1 – 14

NOTE

When using multiple DENON DJ devices such as DN-SC2900, change this

setting so that there are no duplicate numbers.

Network ID

Sets the number of this unit

that“engine”recognizes

when connected to the

network.

1 – 4

NOTE

If the same “Network ID” is used between different units, they cannot be

connected on the network. If the same network IDs are duplicated, “SET

ID >>>1 (duplicated “Network ID” number)” is displayed. Set a different

“Network ID”.

Touch Adjust

Adjusting the touch sensor

sensitivity of the Jog wheel

(vpage32).

Min/1/2/3/Max

Fader Mode

Switches the operation for

fader start for the mixer

connected to this unit.

Switch this setting to match

the connected mixer.

1L Play/Cue : If the mixer is a 1-wire mixer, raise the fader to playback, or

lower it for cue standby.

1L Play/Pause : If the mixer is a 1-wire mixer, raise the fader to playback,

or lower it to pause.

2L Play/Cue : If the mixer is a 2-wire mixer, raise the fader to playback, or

lower it for cue standby.

2L Play/Pause : If the mixer is a 2-wire mixer, raise the fader to playback,

or lower it to pause.

Panel Contrast

Sets the brightness of the

display and buttons and

touch sensor indicator.

0 – 4 : “0” is the brightest, and “4” is the darkest.

Jog Contrast

Sets the brightness of the

jog wheel indicator.

0 – 4 : “0” is the brightest, and “4” is the darkest.

Utility settings

Select the utility setting items using the following operations.

SEL. MEMO

UTIL.

BACK

Menu operation

During standby, pause, or when a le is not selected, press and hold MEMO UTIL.

SEL. ﬂashes blue, “Utility” is shown in the 1st line, and “Save As Def.” is shown in the 2nd line of

the display.

Turn SEL., and select the items you want to set.

Turn SEL., and the item shown in the 2nd line of the display changes.

Press SEL.

The selected item is entered.

•To return to the previous item, press

BACK.

•To exit Utility, when the utility is being displayed, press MEMO UTIL. The screen returns to the previous

screen.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon DN-SC2900 Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info